693468
13
Zoom out
Zoom in
Previous page
1/14
Next page
13
WW_EN
Simple Printer Care
Printer Care
1.
Do not open the film door until all film exposures have
been used, doing so will prematurely expose the remaining
film and render it unusable.
2.
Your printer is a fragile object. Do not expose it to water, sand
or gritty materials.
3.
Do not use solvent such as thinner or alcohol to remove dirt.
4.
Keep the film chamber and printer interior clean to avoid
damaging films.
5.
Do not leave your printer in direct sunlight or hot places such
as the inside of a car. Do not leave the printer in damp places
for prolonged periods.
6.
Moth repellent gas such as naphthalene may affect your
printer and prints. Take care to keep your printer and prints in a
safe, dry place.
7.
Note that the temperature range within which your printer can
operate is +5°C to +40°C.
8.
Take great care to ensure that printed materials do not violate
copyright, image rights, privacy or other personal rights and
do not offend public decency. Actions that violate the rights of
others, are contrary to public decency or constitute a nuisance
may be punishable by law or otherwise legally actionable.
9.
This printer is designed for household use. It is not suitable for
commercial use.
Charging the Battery
The battery has not been charged during manufacture. Please
charge the battery fully before use.
Charge the battery using the supplied USB cable. Charging
times will increase at ambient temperatures below +10 °C or
above +35 °C. Do not attempt to charge the battery at
temperatures above +40 °C or at temperatures below +5 °C as
the battery will not charge.
Battery Life
At normal temperatures, the battery can be recharged about
300 times. A noticeable decrease in the length of time the
battery will hold a charge indicates that it has reached the end
of its service life.
Cautions: Handling the Battery
The battery and printer body may become warm to the touch
after extended use. This is normal.
Certification marks acquired by the printer are located inside
the film chamber
Cautions During Printing
Do not shake the
printer while
printing.
Do not drop the
printer while
printing.
Do not cover the
film ejection slot
while printing.
“instax mini” Film and Print Care
See FUJIFILM Instant Film “instax mini” for film use instructions.
Follow all instructions for safe and proper use.
1.
Keep the film in a cool place. Do not leave the film in a place
where the temperature is extremely high (e.g., in a closed car)
for many hours.
2.
Do not puncture, tear, or cut “instax mini” film. If film becomes
damaged, do not use.
3.
When you load a film pack, use the film as soon as possible.
4.
If the film has been kept in a place where the temperature is
extremely high or low, bring it to room temperature before
starting to print pictures.
5.
Be sure to use the film before the expiration or “Use Before date.
6.
Avoid airport checked luggage inspection and other strong
X-ray illumination. The effect of fogging, etc. may appear on
unused film. We recommend that you carry the printer and/or
the film onto the aircraft as carry-on luggage. (Check with each
airport for more information.)
7.
Avoid strong light, and keep the developed prints in a cool and
dry place.
8.
Do not puncture or cut this film as it contains a small amount
of caustic paste (high alkaline). Never let children or animals
put the film into their mouth. Also pay attention so that the
paste does not come into contact with skin or clothes.
9.
Should the paste inside the film come into contact with skin or
clothes, immediately wash off with plenty of water. If the paste
comes into contact with the eyes or mouth, immediately wash
the area with plenty of water and contact a doctor. Note that
the alkaline inside the film remains active for about 10 minutes
after the picture has been printed.
Cautions on Handling the Film and Prints
For details, refer to the instructions and warnings on FUJIFILM
Instant Film “instax mini”.
Bluetooth® Devices: Cautions
IMPORTANT: Read the following notices before using the
product’s built-in Bluetooth transmitter
Use only as part of a Bluetooth network�
FUJIFILM Corporation and its affiliates do not accept liability for
damages resulting from unauthorized use. Do not use in
applications requiring a high degree of reliability, for example in
medical devices or other systems that may directly or indirectly
impact human life. When using the device in computer and
other systems that demand a greater degree of reliability than
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Instax Mini Link - Smartphone printer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Instax Mini Link - Smartphone printer in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujifilm Instax Mini Link - Smartphone printer

Fujifilm Instax Mini Link - Smartphone printer User Manual - German - 14 pages

Fujifilm Instax Mini Link - Smartphone printer User Manual - Dutch - 14 pages

Fujifilm Instax Mini Link - Smartphone printer User Manual - French - 14 pages

Fujifilm Instax Mini Link - Smartphone printer User Manual - Italian - 14 pages

Fujifilm Instax Mini Link - Smartphone printer User Manual - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info