Manual Florabest FHM 38 A1 - IAN 79826 (page 29 of 34) (English, German, Dutch, French)

630790

Zoom out

Zoom in

1/34

• Run the machine at walking pace, in

strips that are a straight as possible.

For seamless mowing, the strips should

always overlap by a few centimetres.

• On slopes, always work across the

slope.

• For the rst cut of the season, choose

a high the cut height and reduce the

height to around 20 mm for the subse-

quent cuts.

Cleaning and

Maintenance

Have work that is not de-

scribed in these instructions

carried out by one of our

authorised customer service

centres. Use only original

components. The following

states how damage to the

trimmer and possible injury

to people can be avoided.

Wear gloves when dealing with the

blades. Risk of cuts.

• Check covers and safety devices for

damage and check that these are sitting

correctly. Replace if necessary.

Cleaning

Neither hose down nor use running

water to clean the mower.

• Always keep the machine clean. For

cleaning, use a brush or cloth, but no

cleaning agents or solvents.

• After mowing, remove any plant

remains stuck to the wheels and the

blade area.

• Rub the blades with an oil rag or spray

them with a metal maintenance spray.

• Due to the special cutting geometry,

the blade cylinder blades cannot be

re-sharpened. If necessary, the blade

cylinder and sub-blade must therefore

be replaced as a set. Have a specialist

workshop carry out the installation of

the blade cylinder.

Adjusting the Cutting

Clearance

The blade cylinder blades must be ad-

justed if the grass is no longer being cut

evenly and cleanly.

1. Remove the machine key (3) and

metal strips (feeler gauge) (4) from

the machine holder (cf.

5).

2. Push the metal strip (4) between a

blade cylinder (8) blade and the

sub-blade (11).

3. Turn the hex bolts (10) to the right

then to the left on the machine,

in small steps in the clockwise

direction until the metal strip sticks

slightly.

4. Check the setting by turning the

blade cylinder. None of the blade

cylinder blades should be in

contact and grinding on the sub-

blade.

5. Return the machine key (3) and

the metal strip (feeler gauge) (4) to

the tool holder (cf.

5).

If it is no longer possible to adjust

the cutting clearance, the blade

cylinder and sub-blade must be re-

placed as a set.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FHM 38 A1 - IAN 79826 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FHM 38 A1 - IAN 79826 Manual

Product: