Manual Florabest FHM 38 A1 - IAN 79826 (page 28 of 34) (English, German, Dutch, French)

630790

Zoom out

Zoom in

1/34

run the machine at walking pace.

• When working, ensure a rm foothold,

particularly on slopes. Always work

across the slope, never up or down-

wards. Take particular care when chang-

ing the direction of travel on the slope.

Do not work on excessively steep slopes.

• When switching the machine on, avoid

feet or hands being trapped between

the moving blades and the xed parts

of the machine.

• Never carry the machine by the blade

cylinder.

Caution! To avoid damaging the

machine and potential injury as a

consequence:

• Check the terrain on which the machine

is used and remove stones, sticks, wires

or other foreign bodies that may be

picked up and ung outwards.

• Ensure that the machine is in a safe op-

erating condition. Replace worn or dam-

aged parts.

• Protect the machine from the effects of

weathering (damp, frost).

Fitting the Handle

1. Press both ends of the handle bot-

tom (6) together and insert them

vertically through the handle

holder (7) on the machine.

2. Push the holes at the ends over

the two holder bolts (16).

3. Use the screws and wing nuts

from the package to mount the

top part of the handle (1) on the

two cross bars (2).

4. Use the screws and wing nuts

from the package to mount the

cross bars (2) on the bottom part

of the handle (6).

The two centre bars can be secured

in two positions to adjust the handle

bar to your height.

5. Mount the tool holder (5) from

the package to the bottom part of

the handle (6) and snap on the

machine key (3) to it.

Adjusting the Cut Height

The cut height is innitely adjustable from

14–43 mm:

1. Loosen the locknuts (12) on both

sides of the machine.

2. Place one foot on the castors (9)

and set the desired cut height with

both hands on the adjusting han-

dles (14).

Ensure that the machine is set to

the same height on both sides.

3. Retighten the locking screws (12).

Set the cut height no lower than to

where the blade cylinder does not

touch the ground even where it is

uneven.

Working Instructions

Before each use, check the machine

for obvious defects, such as loose,

worn or damaged parts. Check that

all nuts, bolts and screws are sitting

rmly.

Regular mowing stimulates the stronger

formation of leaves in the grass as well as

allowing weeds to die off at the same time.

Thus, the lawn becomes thicker each time it

is mowed and a lawn with even resilience

is produced.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FHM 38 A1 - IAN 79826 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FHM 38 A1 - IAN 79826 Manual

Product: