574910
18
Zoom out
Zoom in
Previous page
1/78
Next page
18
Datos técnicos Taladro atornillador CDD 9.6 CDD 12
Potencia del motor 9,6 V 12 V
Velocidad en vacío marcha 0 - 380 min
-1
0 - 380 min
-1
 2ª marcha 0 - 1100 min
-1
0 - 1100 min
-1
Par de apriete máximo
 en lugares blandos (madera) 10 Nm 18 Nm
 en lugares duros (metal) 26 Nm 30 Nm
Par de apriete regulable 0,5 - 5 Nm 1 - 7 Nm
Alcance del portabrocas 1 - 10 mm 1,5 - 13 mm
Diámetro máx. perforación en metal 12 mm 14 mm
Diámetro máx. perforación en madera 20 mm 25 mm
Alojamiento de herramientas en el eje 1/4 " 1/4 "
Peso con acumulador 1,8 kg 2,0 kg
Cargador MCU 15 EC 60 ECU 45
Tensión de la red (entrada) 220 - 240 V~ 230 - 240 V~ 230 - 240 V~
Frecuencia de la red 50/60 Hz 50 Hz 50/60 Hz
Tensión de carga (salida) 4,8 - 14,4 V (DC) 7,2 - 14,4 V (DC) 7,2 - 14,4 V (DC)
Corriente de carga
 Carga rápida max. 7,5 A 1,5 A max. 3 A
Carga de mantenimiento
por impulsos aprox. 0,06 A 0,03 A 0,06 A
Tiempo para recargar para
NiCd 1,2 Ah aprox. 11 min - -
NiCd 1,4 Ah aprox. 13 min aprox. 70 min aprox. 38 min
NiCd 1,7 Ah aprox. 16 min aprox. 85 min aprox. 42 min
NiCd 2,0 Ah aprox. 20 min aprox. 95 min aprox. 46 min
NiMH 3,0 Ah aprox. 70 min - aprox. 70 min
Peso 0,9 kg 1,4 kg 0,5 kg
Juego de acumuladores BPH 9.6 C BPH 12 C BP 12 C 3.0 MH
de pedido 488 437 488 438 489 728
Voltaje 9,6 V 12 V 12 V
Células 8 x 1,2 V, NiCd 10 x 1,2 V, NiCd 10 x 1,2 V, NiMH
Capacidad 2,0 Ah 2,0 Ah 3,0 Ah
Margen de temperaturas de carga 5 - 45 °C 5 - 45 °C 5 - 45 °C
Control de estado de carga p o r r e s i s t e n c i a N T C
Peso 0,5 kg 0,6 kg 0,6 kg
Las figuras indicadas se encuentran al principio de las instrucciones para el servicio.
1 Utilización adecuada
Los taladros atornilladores con acumuladores
son adecuados para perforar en metal,
madera, plásticos y materiales similares, así
como para atornillar y enroscar tornillos con
hasta 6 mm de diámetro. Los cargadores hay
que usarlos para recargar los juegos de
acumuladores de indicados en el punto 2.2.
El usuario se responsabiliza de los daños
debidos a un uso inadecuado.
Para su seguridad
Atenerse a las indicaciones de seguridad
adjuntas.
Proteger los aparatos del agua.
Protéjase Vd. de las piezas que giren.
Al perforarse paredes, ténganse en cuenta
eventuales conductos de gas, electricidad y
agua.
Si el cable de alimentación está dañado, no
use el cargador.
No use juegos de acumuladores defectuosos
o averiados.
Emplee sólo juegos de acumuladores de
Festool. No emplee juegos de acumula-dores
ya desgastados y preparados de nuevo para
poder ser usados. El usuario se responsabiliza
de los posibles daños por el uso de juegos
de acumuladores no originales de Festool.
No echar los juegos de acumuladores
desgastados al fuego o a la basura doméstica.
Festool ofrece un servicio para eliminar de
acuerdo con el medio ambiente los
acumuladores que ya no sirven (ver las
indicaciones en RECICLAJE DE ACU-
MULADORES).
No abrir los juegos de acumuladores.
No almacenar los juegos de acumuladores
junto con objetos metálicos (peligro de
cortocircuito).
En el interior del cargador no debe penetrar
ningún trozo de metal (viruta metálica) a
través de las aberturas para los acu-
muladores ni de las ranuras de ventilación
(peligro de cortocircuito).
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CDD 12.0 V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CDD 12.0 V in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info