458693
2
Zoom out
Zoom in
Previous page
1/24
Next page
2
Electrical safety
4a Grounded tools must be plugged into an outlet
socket that is properly installed and grounded in
accordance with all codes and ordinances. Never
remove the ground prong or modify the plug in any
way. Do not use any adapter plugs. Check with a
qualified electrician if you are in doubt as to whether
the outlet socket is properly grounded. If the tools should
electrically malfunction or break down, grounding provides a
low-resistance path to carry electricity away from the user.
4b Double-insulated tools are equipped with a
polarized plug (one blade is wider than the other.)
This plug will fit in a polarized socket only one way. If the plug
does not fit fully in the socket, reverse the plug. If it still does
not fit, contact a qualified electrician to install a polarized
socket. Do not change or modify the plug in any way. Double
insulation eliminates the need for the three-wire grounded
power cord and grounded power supply system.
5 Avoid body contact with grounded surfaces such
as pipes, radiators, ranges (stoves) and refrigerators.
There is an increased risk of electric shock if your body is
grounded.
6 Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
7 Do not abuse the power cord. Never use the cord
to carry the tool or to pull the plug from a socket.
Keep cord away from heat, oil, sharp edges or moving
parts. Replace damaged cords immediately. Damaged
cords increase the risk of electric shock.
8 When operating a power tool outside, use an
outdoor extension cord marked W-A or W. These
cords are rated for outdoor use and reduce the risk of electric
shock.
GENERAL SAFETY RULES
WARNING! Read and understand all instructions. Failure
to follow all instructions listed below may result in electric
shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Work area
1 Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
2 Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which
may ignite the dust or fumes.
3 Keep bystanders, children, animals, and visitors
away while operating a power tool. Distractions can cause
you to lose control.
Personal safety
9 Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating power
tools may result in serious personal injury.
10 Dress appropriately. Do not wear loose clothing
or jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes,
jewelry, or long hair can get caught in moving parts.
11 Avoid accidental tool starts. Be sure the switch is
off before plugging the tool in. Carrying tools with your
finger on the switch or plugging in tools that have the switch
on invites accidents.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool ATF 65 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool ATF 65 E in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info