Ferm 55
AVAILABLE SPARE PARTS FOR FZT-315
REF.NR. DESCRIPTION FERM NR.
5 HANDLE 407610
6KNOB FOR HANDLE 407611
11 SCREW WITH PLASTIC KNOB 407612
12 MOTOR 407613
13 SWITCH 407614
24 SCREW WITH PLASTIC KNOB 407615
25 RUBBER FOOT 407616
29 FLANGE INSIDE 407617
30 FLANGE OUTSIDE 407618
31 SPLITTER 407620
32 TABLE INSERT 407621
33 COVER FOR SAWBLADE 407622
35/37/43/49/61/63/11
SAW GUIDE COMPLETE 407623
38 SAW BLADE 420210
62 BOLT LEFT 407624
Product: Ferm saw bench.
Type FZT-315, Art.nr. 420090
Ferm, Genemuiden, The Netherlands
Acoustic pressure level (L
pa
) 93.62 dB(A)
Acoustic capacity level (L
wa
) 106.84 dB(A)
The noise level at the workplace can exceed 85
dB(A) during sawing. In this case noise and he-
aring protection is necessary for the user.
This machinery is radio and TV suppressed according to
EN 55014.
SERIAL NUMBER
The serial number on the machine is composed as fol-
lows:
Serial nr.
Read these instructions for use properly before
you use the saw bench!
WORKING WITH
THE FZT-315 SAW BENCH
This universal semi-professional wood circular saw is a
machine for sawing wood by means of a circular saw, pro-
vided with a bench top and a saw situated under the ben-
ch top. The circular saw is only suitable for hobby and do-
it-yourself purposes.
KNOW YOUR MACHINE
Read these instructions for use carefully before you use
the machine and pay particular attention to the safety in-
structions. Maintain your machine according to the in-
structions, so that it always functions properly. Only
switch on the machine after you have understood how
you must operate it and be especially sure that you know
exactly how you can switch off the machine in case of an
emergency. Keep this manual and the other documenta-
tion about your machine in a safe place.
GENERAL SAFETY INSTRUCTIONS
1. Keep the working area clean and tidy. An untidy wor-
king environment leads to accidents. Also ensure
that there is sufficient light.
2. Take influences from outside into account. Do not
leave machinery lying in the rain. Do not use machi-
nery in a damp or wet environment and do not use
machinery in the vicinity of inflammable liquids or ga-
ses.
3. Prevent electric shocks. Protect the mains lead
against heat, oil and sharp objects. Avoid physical
contact with exposed parts of the mains lead, plug
and earthed objects, such as metal pipes, radiators,
central heating boilers, refrigerators etc.
4. Keep children away. Do not allow other people to
touch the machinery, keep them out of the working
area.
5. Store the machinery in a safe place. Machinery not in
use must be kept in dry, closed areas, out of reach of
children.
6. Do not overload the machinery. You will work better
and more safely within the indicated capacity reach.
Damage as a result of overloading does not fall under
the guarantee.
7. Use the correct machinery. Do not use machines with
too low a capacity for too heavy a load. Do not use the
machine for a purpose or job for which it is not inten-
ded.
8. Do not wear any wide, loose clothing or jewellery.
They can become caught in the moving parts.
Wearing rings with protruding parts must also be
avoided. If you have long hair, wear your hair tied
back or use a hair net. Wear rubber footwear for wor-
king outside.
9. Wear safety goggles. Use a dust mask for work which
produces dust.
10. Do not use the mains lead in the wrong way. Do not
transport the machine connected to the mains lead
and do not use the mains lead to remove the mains
plug from the mains (the wall socket). Protect the
mains lead against heat, oil and sharp objects.
11. Clamp down the workpiece. Always press the work-
piece firmly against the tool rest. Do not process any
workpieces that are so small that you cannot hold
them.
12. Ensure a safe position and a stable balance.
13. Maintain the machinery with care. Keep it clean in or-
der to be able to work better and more safely. Follow
the maintenance instructions and the advice with re-
gard to changing the machinery. Keep the machine
dry and free from oil and grease.
14. Remove the mains plug from the mains (the wall
socket) when the machine is not in use, during main-
tenance work or while changing accessories and ma-
chine tools.
ORDER NUMBER/YEAR OF CONSTRUCTION
