Categories
835979

Ferm ISA1005 Manual

5
Zoom out
Zoom in
Previous page
1/16
Next page
5
EN
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-4.
1. Dripper
2. Spike
3. Dripper end plug
4. Hose splitter
5. Dripper hose
6. Hose
7. End plug
8. Quick connector
9. Water timer
3. ASSEMBLY
Assemble irrigation set
Fig. B,C,D & E
1. Divide dripper hose (5) into equal pieces.
(fig.B). With provided hose, the dripper hose
will be 1 meter (14x). When a different setup is
requested, cut hose accordingly.
2. Divide main hose (6) similar to the previous
step into desired lengths for your requested
setup. Make sure to cut a small section for the
end stop (7) of your desired setup.
3. Connect every dripper hose (5) to a hose
splitter (4) or dripper (1) depending on your
desired setup. If the dripper is the final dripper
in this line, place a dripper end plug (3) on
the opposite side of the dripper as shown in
Fig.D.
4. Now connect every main hose (6) to a hose
splitter (4) by unscrewing the hose rings,
putting the hose ring over the hose and press
the hose into the splitter until fully inserted.
Screw the hose ring back on the splitter until
secured.
5. Press and snap the spike (2) on the bottom
side of the dripper (1).
6. Attach the included quick connector (8) to
the main hose (6) and your dripper setup. It’s
recommended to attach the dripper setup
to the included water timer with the quick
connector. (see separate WTA1005 manual for
more information)
7. The irrigation set is ready for use.
4. OPERATION
Place and operate irrigation set
Fig. F
1. Place the assembled irrigation set as needed.
The set is suitable for garden borders, pot
plants, hedges and lawn.
2. Connect the water supply to the quick-
connector (8).
3. Set the drippers as requested on one of the
three modes. When fully closed (tightened
clockwise) :
a. Turn dripper 90 degrees counter clockwise
for mist function
b. Turn dripper 180 degrees counter
clockwise for spay function.
c. Turn dripper 240 degrees counter
clockwise for drip function. Tilt dripper for
directed dripping.
5. MAINTENANCE
Cleaning
Clean with a suitable proprietary household
cleaner and a soft dry cloth. Do not use solvents
(petrol, alcohol, ammonia, etc.) as they will
damage the plastic parts.
Storage
Drain system from water and store in a frost-free
place. This could damage the drippers.
WARRANTY
FERM product are developed to the highest quality
standards and are guaranteed free of defects in
both materials and workmanship for the period
lawfully stipulated starting from the date of original
purchase. Should the product develop any failure
during this period due to defective material and/
or workmanship then contact your FERM dealer
directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers.
• Normal wear and tear.
… 5 …

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm ISA1005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm ISA1005 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info