42 Ferm
3 DIMENSIONAL SANDER
(FDS-3DK)
For your own safety and for the safety of others,
please read these instructions carefully before
using this appliance. It will help you understand your product
more easily and avoid unnecessary risks.
Keep this instruction manual in a safe place for future use.
CONTENTS:
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE DATA
Contents of packing
• 3 Dimensional sander
• Dust bag
• Case
• Sanding rings:
-15 pcs. G60
-15 pcs. G80
-15 pcs. G120
• Polishing wheels (15 pcs.)
• User manual
• Warranty card
• Safety instructions
Introduction
The 3 Dimensional sander (FDS-3DK) is designated for
dry sanding and polishing round, square and flat surfaces.
Technical specification
Features (fig. 1)
1. On/off switch
2. Handle
3. Dust bag
4. Sanding disc
5. Ventilating apertures
6. Sanding ring
2. SAFETY INSTRUCTIONS
Explanation of symbols
In this manual and/or on the machine the following
symbols are used:
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don’t
need any earthed plug.
Risk of damaging material and/or physical injuries
Shows presence of voltage
Electrical safety
• Always check that the power supply corresponds to
the voltage on the rating plate.
• Immediately throw away old cables or plugs when
they have been replaced by new ones. It is dangerous
to insert the plug of a loose cable in the wall outlet.
• Only use an approved extension cable suitable for
the power input of the machine. The minimum
conductor size is 1,5 mm2. When using a cable reel
always unwind the reel completely.
Specific safety instructions
• Contact or inhalation of dust coming free during
sanding (e.g. lead painted surfaces, woods and
metals), can endanger the health of operator and
bystanders. Always wear appropriate personal
equipment as a dust mask and use the dust bag during
sanding.
• Check that the switch is not in the “ON” position
before connecting the machine to the mains voltage.
• Always keep away the mains lead from moving parts
of the machine.
•Use safety glasses, especially when sanding above
your head.
3. ASSEMBLY
Dust collection (fig. 1)
The 3D sander has been carried out with a dust bag (3) to
keep the working surface clean. The dust bag must be
installed on the back side of the machine, on the opening.
It is necessary to empty the dust bag regularly for an
efficient use.
Empty it as follows:
• Turn the dust bag slightly and pull it out of the
machine’s adapter.
• Empty the dust bag in a suitable place.
Model
Art. nr.
Voltage
Frequency
Input power
Tool class
No load speed
Lpa (Sound pressure
level)
Lwa (Sound power
level)
Weight
Vibration
| FDS-3DK
| PSM1014
| AC 230 V
| 50 Hz
| 180 W
| II
| 3000 /min
| 65.1 dB(A)
| 76.1 dB(A)
| 1,3 kg
| 1.54 m/s2
Ferm 3
SPARE PARTS LIST FDS-3DK
REF NR DESCRIPTION FERM NR
800607 BEARING 607 Z 4
800609 BEARING 609 ZZ 8
800696 BEARING 696 ZZ 11
800686 BEARING 686 ZZ 17
806802 BEARING 6802 ZZ 20
408265 SANDING DISK 21
408266 ON/OFF SWITCH 29
408267 SWITCH COVER 30
408268 PIN 31
PSA1002 12-STUKS SET SCHUURPAPIER G60 -
PSA1003 12-STUKS SET SCHUURPAPIER G80 -
PSA1004 12-STUKS SET SCHUURPAPIER G100 -
PSA1005 12-STUKS SET POLIJSTSCHIJVEN -
408257 DUST BAG -
