762292
3
Zoom out
Zoom in
Previous page
1/22
Next page
42 Ferm
ANGLE GRINDER
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
Read this operators guide carefully, before using
the machine. Ensure that you know how the
machine works, and how it should be operated. Maintain the
machine in accordance with the instructions, and make
certain that the machine functions correctly. Keep this
operator’s guide and other enclosed documentation with the
machine.
CONTENTS:
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE DATA
INTRODUCTION
This machine is developed for grinding and roughing of
metal and stone. With help of the correct accessories
the machine can also be used for brushing and sanding.
PACKAGE CONTENTS
1 Angle grinder
1 Side handle
1 Spanner
1 Instruction manual
1 Safety instructions
1 Warranty card
TECHNICAL SPECIFICATION
FEATURES
Fig.1
1. ON/OFF-switch
2. Guard
3. Side handle
4. Grinding disc
5. Spindle lock
2. SAFETY INSTRUCTIONS
EXPLANATION OF SYMBOLS
In this manual and/or on the machine the following
symbols are used:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don’t
need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains
electricity in the case that the cord gets
damaged and during maintenance
Keep bystanders away
Risk of fire
Wear ear and eye protection
Wear protective gloves
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the
appropriate recycling locations.
SAFETY INSTRUCTIONS
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions. Keep these
instructions in a safe place!
Check that the maximum speed indicated on the
grinding disc corresponds to the maximum speed of
the machine. The speed of the machine must not
exceed the value on the grinding disc.
Make sure that the dimensions of the grinding disc
correspond to the specifications of the machine.
Make sure that the grinding disc has been mounted
and fastened properly. Do not use reducing rings or
adapters to make the grinding disc fit properly.
Treat and store grinding discs in conformance with
the supplier’s instructions.
Voltage | 230 V~
Frequency | 50 Hz
Power input | 880 W
No-load speed | 11000/min
Disc diameter | 125 mm
Spindle dimension | M 14
Weight | 2,5 kg
Lpa (sound pressure) | 89 db(A)
Lwa (sound power) | 102 db(A)
Vibration value | 1.16 m/s2
Ferm 3
SPARE PARTS LIST FAG-125N
POSITION DESCRIPTION FERM NR
6 PINION GEAR 406068
11 ARMATURE 406069
18 SIDE HANDLE 406274
23 SPINDLE GEAR 406070
31 PROTECTING COVER 406071
33 FLANGE INSIDE 406846
35 FLANGE OUTSIDE 406847
37 STATOR 406072
38 SLIDE SWITCH KNOB 406073
40 SWITCH DRAW BAR 406074
43 CARBON BRUSH HOLDER 406075
44 CARBON BRUSH 406076
45 CARBON BRUSH CAP 406077
50 SWITCH 406078
58 WRENCH 406814
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm AGM1002 FAG-125N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm AGM1002 FAG-125N in the language / languages: All languages as an attachment in your email.

The manual is 5,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info