624624
3
Zoom out
Zoom in
Previous page
1/8
Next page
32
INTERNAL FORK
ROUTING
Understand that Felt Bicycles recommends
the brake cable is routed from the bottom
up. Begin by inserting the end of the
cable into the lower hole, feeding the
cable through the fork blade toward the
upper hole.
This section view shows the brake
cable entering the lower hole,
traveling up the fork blade and
out the upper hole.
Once the brake cable has exited the upper
cable hole as shown, slide the grommet
over the cable housing and press the rigid
shoulder into the cable hole to firmly hold
the brake cable in place.
The image to the left shows the front brake
cable (pink) successfully routed up through
the lower cable hole. The cable travels
through the fork blade, out of the upper
cable hole, and into the brake lever.
Note: Enough slack is left so the handlebars
can be fully turned in both directions without
interference between cables.
INTERNAL FORK
ROUTING
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Felt Z series Disc Carbon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Felt Z series Disc Carbon in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info