624629
13
Zoom out
Zoom in
Previous page
1/14
Next page
23
22
3. Tighten the Footplate bolt to 5Nm making sure to preserve the proper
orientation of the Skirt Guard Mounting Tab
4. Attach the Skirt Guard at Point 2 with one of the M6-sized bolts.
5. Pull the Skirt Guard taut at Point 1 and mark where it overlaps the bolt hole
on the Load Deck upright using your marker pen.
6. Place the scrap wood block behind the mark and, using the ¼” bit, drill a
hole through the Skirt Guard at the mark.
7. Using an M6-sized bolt, attach the Skirt Guard to the Load Deck upright.
8. Pull the Skirt Guard taught at Point 3 and mark where it overlaps the hole
on the vertical face of the Mounting Tab.
9. Place the scrap wood block behind the mark and, using the ¼” bit, drill a
hole through the Skirt Guard at the mark.
10. Using the M5-sized bolt, attach the front of the Skirt Guard to the Mounting
Tab.
11. Torque all three Skirt Guard bolts to 3Nm.
12. Repeat the procedure for the other side of the bike.
13. Check weekly to ensure that the Skirt Guard bolts are tight.
ACCESSORY INSTRUCTIONS
CONTACT
INFORMATION
Felt Racing, LLC
12 Chrysler
Irvine, CA 92618
USA
WWW.FELTELECTRIC.COM
Felt GmbH
Industriestr. 39
26188 Edewecht
Germany
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Felt BruHaul at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Felt BruHaul in the language / languages: English as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info