624629
12
Zoom out
Zoom in
Previous page
1/14
Next page
21
20
2. Place the Footplate on the hoop and line up with holes of the clips and the
chainstays.
3. Place washers onto each of two bolts and attach them to the frame through
the holes in the Footplate that line up with the rear chainstay hole. Do not
fully tighten.
4. If you will be adding the Skirt Guard accessory, do not attach the front
screw until you are installing the Skirt Guard.
5. Place a washer (not shown) onto each of two bolts and put the bolts
through the holes on the outer edge of the Footplate and through the clips.
6. Place a second washer (not shown) and a nut onto the bottom of the screws
underneath the clip.
7. Tighten all Footplate bolts to 5Nm
8. Repeat the procedure for the other side of the bike.
9. Check weekly to ensure that the Footplate bolts are tight.
10. Have Fun!
ACCESSORY INSTRUCTIONSACCESSORY INSTRUCTIONS
Skirt Guard Kit Installation
Included Parts
2 Plastic Skirt Guards
4 M6 Bolts
2 M5 Bolts
2 Skirt Guard Mounting Tabs
Required Tools
Power Drill with ¼” bit and a scrap wood block
Metric bicycle multi-tool or Allen wrench set
Permanent Ink Marker
Micro Torque wrench (optional)
Installation Steps
1. If the Bamboo Footplate Kit (Part # 9000141) has been installed, remove
the inside front mounting bolt (at the chainstay).
2. Place a washer and a Skirt Guard Mounting Tab onto a bolt and screw
the bolt through the front, inboard hole and into the hole in the chainstay.
Make sure the Mounting Tab is oriented so that its vertical surface
faces away from the bike (1, below).
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Felt BruHaul at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Felt BruHaul in the language / languages: English as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info