Manual Felisatti RGF150 (page 3 of 26) (English, German, French, Italian, Portuguese, Spanish)

502503

Zoom out

Zoom in

1/26

TECHNICAL DATA

Rotorbital sander RGF150/600E

Input power W 600

No-load speed rpm 2500-6500

Orbits per minute opm 5000-13000

Max. diameter of the Velcro plate mm 150

Oscillation circle mm 5

ppro

. weight (without acces.) Kg 2.4

The instructions contained in this manual must be strictly

followed, it should be carefully read and kept close at

hand to use when carrying out maintenance on the

indicated parts.

If the machine is used carefully and normal maintenance

is carried out, it will work well for a long time.

The functions and use of the tool you have bought shall

be only those described in this manual. Any other use

of the tool is strictly forbidden.

ILLUSTRATIONS

DESCRIPTION (See figures)

A Start-up switch (Fig.1)

B Auxiliary handle (Fig.1)

C Spindle blocking button (Fig.2)

D Velcro plate (Fig.1)

E Electronic regulation control (Fig.1)

F Dust output (Fig.2)

EQUIPMENT

- Operating instructions

- Safety instructions

- Warranty

SAFETY INSTRUCTIONS

 See “Safety Instructions” manual, supplied with this

instruction manual.

 WARNING! Material containing asbestos must not be

polished. Working with materials containing amian-

thus/asbestos and/or silica stones produces a dust,

which is harmful to health. Protect yourself from inhal-

ing this dust, in compliance with current regulations on

accident prevention.

 For your personal safety, always connect the machine

to a mains supply protected by a differential and ther-

mal cutout switch, in accordance with regulations on

low-voltage wiring sitemaps.

 Do not pierce the motor housing as this could damage

the double insulation (use adhesive labels).

 Check the work area with a metal detector for hidden

wires, gas and/or water pipes.

 Always unplug the machine before carrying out

work on it.

 Always stop the machine by switching it off, not by

unplugging it.

 WARNING! Before each use, inspect the plug and

lead. Should they need replacing, have this done by an

official service centre.

 Always keep the mains lead clear of the working range

of the machine.

 Only plug the machine in when it is switched off.

 Always use the machine with the auxiliary handle

attached.

 Hold the machine firmly in both hands and in a stable

position.

 Check that the speed marked on the disk is the

same or superior to the nominal velocity of the Ro-

torbital sander.

 Assure yourself that the dimensions of the disk are

compatible with the Rotorbital sander.

 The abrasive discs should be handled and kept with

the utmost care, in accordance with the manufac-

turer’s instructions.

 Protect the polisher from knocks, collisions and

grease.

 Carefully verify the plate in order to assure yourself

that it is not damaged, nor does it have any cracks

before using it.

 Assure yourself that the abrasive disks are mounted in

accordance with the manufacturer’s instructions.

 Check that the disc has been properly fitted and se-

cured before using the machine. Start the machine

with no load and run for 30 seconds in a safe position;

if you notice serious vibration or any other defect stop

the machine immediately. This can indicate a incorrect

installation or a badly balanced plate.

 Beware of shavings that fly off. Hold the tool that so

that sparks fly away from you or other people and in-

flammable materials.

 When working on stone, use dust extraction equipment

and wear a mask.

 In order for the job to be effective, you should select,

based on the material and surface finish, the appropri-

ate size and abrasive.

 Do not touch rotating polishing tools.

 WARNING! The machine maintains itself running

during some moments after turning it off.

 When working with the machine, always wear safety

goggles and ear protection. Other personal protection

equipment such as dust masks, gloves, helmet and

apron should be worn when necessary, along with

non-slip safety footwear. When considering the need

to use a protective mask against the dust, this should

also be for the possible harmful effects of the polished

material and paint or other surface coating. If in doubt,

use safety equipment.

 Make sure the vents are free when working with dust. If

they require cleaning, first unplug the machine, do not

use metal objects and avoid damaging internal parts.

 WARNING: Certain types of dust produced by mechani-

cal polishing, sawing, grinding and drilling, together with

other construction activities, contain chemical agents

which are known to cause cancer, congenital and other

similar defects. Some examples of the chemical agents

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti RGF150 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Felisatti RGF150 Manual

Product: