- New hard disks have to be formatted, before you can use them.
- Connect the FANTEC DB-ALU31A via USB to your PC with USB
interface.
- Then turn the power on.
STEP1: Right-click on
“My Computer” icon and select
the ”Manage” column.
STEP2: Select “Disk Management”
and you will see your External HDD
showed “Unallocated”.
Contenu de l'emballage: FANTEC DB-ALU31A, câble USB 3.1, manuel,
support, vis,adaptateur d'alimentation, disque dur de fixation Pad, les pieds en
caoutchouc
Guide d'installation du matériel
ÉTAPE 2 : Poussez le disque dur
vers la carte électronique et vérifiez
que le connecteur SATA est
correctement branché.
ÉTAPE 3 :
sur le plateau ou bien utiliser le
disque dur de fixation Pad.
Visser le disque dur
ÉTAPE 4 : Revissez le couvercle
arrière.
L'opération
d'assemblage e st terminée.
É
É
l
Vous pouvez utiliser le support pour le
mode permanent. Si vous voulez utiliser
l'appareil horizontalement, s'il vous plaît
monter les pieds en caoutchouc clos sur
cette affaire.
Guide de formatage du disque dur
- Les nouveaux disques durs doivent être formatés avant qu'ils
ne puissent être utilisés.
- Branchez le FANTEC DB-ALU31Apar USB sur votre ordinateur.
Mettez en marche.
TAPE 1 : Cliquez à droite sur l'icône
« Mon ordinateur » et sélectionnez
a colonne « Gestion ».
É
É
ÉÉ
TAPE 2 : Sélectionnez « Gestion
de disque » et vous verrez que votre
disque dur externe est indiqué
comme « Non affecté ».
Sie können den Standfuß für den
stehenden Betrieb benutzen. Wenn Sie
das Gerät liegend benutzen wollen,
kleben Sie bitte die beiliegen den Füße
auf das Gehäuse.
HDD Formatierungsanleitung
- Neue Festplatten müssen formatiert werden, bevor Sie diese
benutzen können.
- Verbinden Sie das FANTEC DB-ALU31A mittels US
B Kabel mit der
USB Schnittstelle ihres Computers und schalten Sie den Strom ein.
Schritt 1: Rechtsklick auf das
Symbol “Arbeitsplatz”; und wählen
Sie “Verwalten” in dem Menü aus.
Schritt 2: Wählen Sie die
“Datenträgerverwaltung” aus. Ihre
Festplatte wird als “Nicht initialisiert”
angezeigt. Bitte initialisieren Sie die
Festplatte.
Package contents: FANTEC DB-ALU31A , USB 3.1 Cable, Manual, Stand,
crews, Power Adapter, HDD fixing Pad, Rubber feet
Hardware Installation Guide
STEP2: Push the HDD to wards
the electronic board and make
sure the SATA connector is well
connected.
STEP3: Screw the HDD on the
ray tightly or use the HDD
xing Pad.
STEP4:Close the enclosure and
screw the rear cover back.
The assembling process
is now accomplished.
fi
indem Sie die zwei Schrauben der
Rückblende lösen. Ziehen Sie den
Festplattenkäfig aus dem Gehäuse
raus.
STEP1: Open the enclosure by
loosening the two screws of the
rear cover. You will see the internal
Structure of the enclosure.
ÉTAPE 1: Ouvrez le boîtier, en
desserrant les deux vis du capot
arrière. Vous pourrez observer la
structure interne du boîtier.
www.fantec.com
www.fantec.comwww.fantec.de
For warranty processing, please
contact your local dealer.
Pour toute réclamation ou question
relative à la garantie commerciale ,
merci de contacter votre revendeur le
plus proche.
s
10
Generation II
Generation II
10
10
Generation II
1
.
3
+
10
Generation II
Generation II
10
10
Generation II
1
.
3
+
10
Generation II
Generation II
10
10
Generation II
1
.
3
+
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Fantec DB-ALU31A at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Fantec DB-ALU31A in the language / languages: English, German, French as an attachment in your email.
The manual is 1,53 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
