499722
5
Zoom out
Zoom in
Previous page
1/8
Next page
13
Fig. 8
Fig. 7
CONTROL MODEL
Proceed as in Pulser model. Fill the filter basket with the right amount of coffee, and press the desired option
on the switchboard. The switchboard is already programmed with 4 standard doses (if you want to modify them,
see setting) and a continuous coffee button. The first 4 buttons (1 short coffee – 1 large coffee – 2 short coffees –
2 large coffees) disconnect automatically. The 5th one is for continuous coffee, and should be pressed again to
disconnect it.
KEEP THE PORTAFILTER ALWAYS INTO THE GROUPHEAD TO KEEP IT WARM, it is very important
to maintain it with a suitable temperature in order to obtain a good espresso coffee.
11 Electronic control panel
11.1 Electronic control panel features
The 1d5 control panel does the following functions:
Four different coffee doses for each single group plus continuous. Coffee doses´volumetric control.
Timed tea dose´s control (on customer´s request)
Simultaneous dispensation of the coffee and Tea groups (on customer´s request).
Survey of the filling-up level/safety (on customer´s request).
Automatic switch off in case boiler is operated dry.
Heating element protector (on customer´s request)
System´s supervision through alarms.
Serial connection RS-232 with data-reading devices from the control panel to the computer.
Brewing group auto-cleaning.
Those machines which have more than one control panel, in case of anomaly in any of their control
panels, you can continue working with the other ones because they are independents.
11.2 Programmation dosage of the control panel
It is possible to modify the quantity related to the coffee doses (through the volumetric control) and memorize
them by means of the following procedures:
Press the key 7 pad “*”( continuous coffee)- see Fig. 8 -and keep it pressed for 7 seconds, until all the
programming LEDs on the keyboard are simultaneously switching on. Within 5 seconds press any of the pads
related to the 4 coffee selections(1 short coffee, 2 short coffees, 1 large coffee, 2 large coffees) which can be
programmed. You will see all the green LEDs switch off, except the option you have pressed as well as “*” led.
When the required coffee dose is reached, press the selected key pad to stop the dispensing. The new value
of the dose is memorized and the LED of this option will switch off to show that setting has been successful. To
proceed with the other coffee doses´s programming, repeat the same sequence.
You should carry out this process using fresh coffee in the portafilter.
You are able to program any of the coffee doses, meanwhile the other remain memorized because they are
independent.
Example of 1 short coffee programming:
Unlock the portafilter from the machine and fill it with fresh ground coffee. Lock it into the group head, place
one cup beneath the spout. Press the “*” key pad and keep it pressed for 7 seconds, until all the green lights are
simultaneously switching on. Within 7 seconds press “short coffee key” pad, and you will see all the green lights
switch off, except the option you have selected as well as “*” led. The machine will start brewing. When the
required coffee dose is reached, press the “short coffee key” pad. Led of this option will turn off . Programming of
this option has been successful.
Portafilter for two cups
Portafilter for one cup
Double shot filter basket Single shot filter basket
1 SHORT COFFEE
1 LONG COFFEE
2 SHORT COFFEES 2 LONG COFFEES
CONTINUOUS
COFFEE
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Expobar Ruggero 2 GR Compact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Expobar Ruggero 2 GR Compact in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info