665047
5
Zoom out
Zoom in
Previous page
1/20
Next page
4 Precision Tools Ltd. 2010
Functions
Planer: When used as a planer, this tool should only be used
for planing along the grain of wood. It is not suitable for
planing across the grain of wood or on different materials. The
surface to be planed should be checked to ensure it contains
no screws, nails or other metallic objects. Planing is generally
quicker than sanding.
Sander: When used as a sander this tool is suitable for
sanding woods, both along and across the grain, painted
surfaces, some plastics and composites. It is better to sand
materials that splinter or chip easily.
Various grit sanding tubes are available.
Safety Warnings Maintenance and
Servicing
Cleaning
To ensure operator safety, quality of work, and the life of the
tool, it is important to ensure this tool is properly maintained
and cleaned.
a) Before using the tool inspect for damage including
damage to plug, cable, handles, main case, switch,
planer blades, and sanding drum. Sanding drums,
planer cartridges, and blades are the only serviceable
parts of this tool. If the tool is damaged it must not be
used until it has been repaired by EXAKT Precision
Tools Ltd. or its authorised agents
b) Ensure the tool is always kept clean and free from
excessive build up of planing / sanding waste. To
clean first unplug the tool, remove the end cap and
clean with a soft brush, such as a paint brush
c) If the planing/ sanding waste is ejected around the
working area, rather than through the dust nozzle, it is
likely that the dust bag is full, or the extract fan has
become blocked. To clear the fan, first unplug the tool
and then remove the end cap. Insert a long narrow
brush, such as an artist paint brush, all the way into
the fan to clean (Diagram D)
Changing and setting Planing blades
a) Remove the planing drum from the machine as
described in the Changing Functions section
b) (Refer to diagram E) Loosen the 3 bolts holding the
blade cartridge in place slightly using the spanner to
allow the blade to be slid out (it is not necessary to
remove the cartridge from the drum)
c) Reverse (blade is double sided) or replace the blade
back into the cartridge
WARNING! Use care in handling the blades as they
are very sharp!
d) Introduce the blade setting gauge into one end of the
drum, if required, to help set the blades to the correct
dimension
e) Use the adjustment screws to position the blade
f) Re-tighten the 3 cartridge bolts and remove the blade
setting gauge
g) Replace the drum back into the machine and
withdraw the removal tool
h) Replace and tighten the drum locking nut and end
cap respectively
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Exakt SP-180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Exakt SP-180 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info