665047
3
Zoom out
Zoom in
Previous page
1/20
Next page
2 Precision Tools Ltd. 2010
Safety Warnings Operating
Instructions
The Planer / Sander is designed to be used either as a
conventional hand held powered planer, or as a hand held
powered drum sander. These instructions give details on how
to set the tool for both functions.
As with all power tools this tool is powered by electricity, has
exposed rotating parts, makes noise and creates dust. To
ensure personal safety and the safety of others it is essential
that the user reads and fully understands these instructions
and then considers and assesses the dangers carefully before
use. If the user does not fully understand how to use the tool,
or does not feel confident, they should seek instruction from a
suitably trained professional before use.
WARNING ! Wait for the cutter to stop before setting
the tool down. An exposed cuttermay engage the surface
leading to possible loss of control and serious injury. Use the
workstand provided.
Setting the Sanding Cutting Depth
The sanding depth can be set to anywhere up to a maximum
indicated setting (approx. 0.5mm). When using the tool as a
sander it is not recommended to set the depth greater than the
maximum indication on the top of the sander depth scale. For
a high quality finish using less effort, make several shallow
passes. Use a lower cutting depth when working with harder
materials.
a) Identify the sanding depth scale (See Illustrated
Description of Functions)
b) Turn the depth adjuster knob fully anticlockwise until
the arrow lines up with indicator pointer
c) Turn the knob clockwise until the required depth is
achieved
WARNING! In sanding mode the drum will always
remain slightly proud of the base plate even when the arrow
indicates a minimum setting.
Changing Sanding tubes
Sanding tubes are supplied (depending on kit) with varying
grit finishes. These can be changed depending on the
amount of sanding to be carried out & level of surface finish
required. Tubes can be changed by following the
procedure.
a) Unplug the tool from the electricity supply.
b) Remove the end cap screws using the Torx key
provided
c) Pull end cap away from side of machine to expose
the tube
d) Using the small spanner to hold the shaft, place the C
spanner into the slots and release (Diagram A)
e) Remove the locking nut and tube assembly
f) Remove the drum end cap which should come away
from the assembly without resistance
g) Remove the drive end cap by pushing it through the
middle of the sanding tube. This part is held in-situ by
a rubber grip ring (Diagram B)
h) Replace with another tube and re-assemble
List of contents
1 x Planing / Sander
1 x Fence guide
2 x Keys
1 x Vacuum adapter
1 x Removal tool
1 x Dust bag
Spare sanding tubes
(dependant on kit)
1 x Blade setting gauge
1 x Ear plugs
1 x Instruction manual
1 x Case
2 x Spanners
1 x Dust mask
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Exakt SP-180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Exakt SP-180 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info