2.0 Installing the EW1051 using Windows
2000 and XP (Service Pack 1 & 2)
When using Windows 2000 or Windows XP with Service Pack 1 or 2, you need to
install the software supplied on CD-ROM. Use the following steps:
1. Make sure your computer is turned on and Windows is completely started.
2. Insert the supplied CD-ROM in your computer’s CD-ROM or DVD-player.
3. The wizard will start automatically.
4. Choose you language and click ‘next’.
5. Follow the steps shown on-screen to install the software.
6. After installation, you can plug in the USB cable of the EW1051.
7. The computer will recognize the new hardware and the hardware will be installed
automatically.
3.0 Installing the EW1051 using Windows XP
Service Pack 3, Vista and Windows 7
There are two manners to install the EW1051 using windows XP with Service Pack 3,
Vista and Windows 7: Automatically and manually. We will explain both manners.
3.1 Installing the EW1051 automatically
1. Make sure your computer is turned on and Windows is completely started.
2. Take the EW1051 out of the packaging.
3. Plug the USB cable of the EW1051 in a free USB port of your computer.
4. Windows will detect new hardware.
5. Let Windows install the new hardware automatically. Windows will ask you to
make a connection with the Windows update site. Let windows make this
connection.
6. Windows will install the EW1051 as a ‘USB card reader’ (This name can differ,
depending on the Operating System).
7. The EW1051 is now ready to be used.
3.2 Installing the EW1051 manually
1. Go to ‘Device Manager’.
2. The EW1051 is mentioned in the hardware list as a device with a yellow mark.
3. Double-click this device and click ‘Driver’.
4. Click ‘Update driver’.
5. The ‘Wizard update hardware’ appears. Windows will ask you to make a
connection with the Windows update site. Let windows make this connection and
click ‘Next’.
6. Windows will install the EW1051 as a ‘USB card reader’ (This name can differ,
