Manual Eurom Force 2200IND (page 24 of 36) (English, German, Dutch, French)

540700

Zoom out

Zoom in

1/36

USING CHEMICALS

This machine is fitted with an integrated chemicals tank. If you wish to add a cleaning agent to the jet

water, take the following actions:

 Remove the cap with the small hose from the tank

and fill this tank with cleaning agent. Replace the

cap and check that the end of the small hose is

hanging in the cleaning agent.

 Fit the normal jet lance onto the jet pistol (not the

cleaning head or terrace cleaner!) and adjust it to

the lowest pressure by pulling the nozzle forwards

(see diagram).

 When you use the jet the cleaning agent will now

automatically mix with the water and escape through the nozzle.

 Cleaning agents are not mixed in if you adjust the nozzle to the high pressure setting!

 Only use mild cleaning agents intended for high-pressure cleaners. No bleaches, chlorine, corrosive

substances or substances that contain acid. Dilute concentrated cleaning agents before pouring

them into the chemicals tank.

 If your skin comes into contact with the chemicals, wash them immediately and thoroughly with pure

water.

TIPS FOR USE

 When the water jet leaves the nozzle it causes the handle to recoil. You must therefore ensure that

you are standing in a stable position and have a firm grip. Also ensure that the high pressure of the

water jet does not cause objects to move out of place or fall or fly around and cause damage. Also

select a safe location for yourself!

 Keep your work environment clean and tidy.

 The high-pressure jet can cause damage to, for example, tyres if you move the jet too close. Always

maintain a minimum distance of 30 cm from the object to be cleaned! Always adjust the distance to

the object to be cleaned (and therefore the pressure) appropriately.

 Work from the bottom to the top in the case of vertical surfaces.

 Prevent water from splashing onto undesired places.

 Do not move the cleaner by pulling the electrical cable. Do not lift the machine up with the cable.

Prevent damage to the cable caused by oil, solvents, sharp edges, etc. Do not cover the machine

during use.

 Do not use the machine in an insufficiently ventilated room.

 It is forbidden to clean surfaces containing asbestos with high-pressure.

 If the machine is not used for longer than 5 minutes it must be switched off.

SWITCHING OFF

 Switch the machine off (Button to O).

 Close the water supply.

 Allow any pressure to escape by squeezing the trigger until no more water comes out of the nozzle.

 Close the safety lock on the handle.

 Pull the plug out of the socket.

STORAGE

 Before clearing the machine away, the water must be removed from the pump, the hose and the

accessories. You do this by switching the machine off with the switch and disconnecting the water

supply hose. Now start the machine again and squeeze the handle. Allow the machine to operate

until no more water comes out of the jet lance. Then switch the machine off immediately. Never allow

it to ’run dry’!

 Remove the plug from the socket, wind the hose up and hang the cable on the hook.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Force 2200IND in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom Force 2200IND Manual

Product: