755597
21
Zoom out
Zoom in
Previous page
1/24
Next page
38 39
3
Install the new rubber strip in place.
2
1
4
Reinstall the cover plate and fix it with screws.
Troubleshooting
Problems Solutions
RoboVac cannot be
activated.
• Make sure the main power switch is in the ON position.
• Make sure the battery is fully charged.
• If you still have trouble, turn off the main power switch
and then turn it back on.
RoboVac stops
working suddenly.
• Check if RoboVac is trapped or stuck on an obstacle.
• Check if the battery level is too low.
• If you still have trouble, turn off the main power switch,
wait for 2 seconds, and then turn it back on.
You cannot schedule
cleanings.
• Make sure the main power switch on the bottom of
RoboVac is turned on.
• Make sure the scheduled time has been set correctly.
• Check if RoboVac’s power is too low to start cleaning.
• Cleaning schedules are erased when RoboVac is powered
off or when reset to factory default settings. If RoboVac is
powered on without Internet access, cleaning schedules
will not synchronize and must be reset via the app.
Suction power is weak.
• Check if any obstructions are blocking the suction inlet.
• Empty the dust collector.
• Check if the filter is wet due to water or other liquid on
the floor. Air-dry the filter completely before use.
RoboVac cannot be
charged.
• Check if the indicator on the Charging Base lights up. If
not, contact the eufy service center to repair or replace
the Charging Base or power adapter.
• Dust off the charging contact pins with a dry cloth.
• Check if you can hear a beep when RoboVac is docked
onto the Charging Base. If not, contact the eufy service
center to repair or replace the Charging Base.
RoboVac cannot return
to the Charging Base.
• Remove objects within 3 ft/1 m to the left and right side
and within 6 ft/2 m of the front of the Charging Base.
• When RoboVac is in the vicinity of the Charging Base, it
will return more quickly. However, if the Charging Base is
located far away, RoboVac will need more time to return.
Please be patient as it works its way back.
• Clean the charging contact pins.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufy RoboVac G10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufy RoboVac G10 in the language / languages: English as an attachment in your email.

The manual is 2,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eufy RoboVac G10

Eufy RoboVac G10 Quick start guide - English - 8 pages

Eufy RoboVac G10 User Manual - German - 20 pages

Eufy RoboVac G10 Quick start guide - German - 8 pages

Eufy RoboVac G10 User Manual - Dutch - 20 pages

Eufy RoboVac G10 Quick start guide - Dutch - 8 pages

Eufy RoboVac G10 User Manual - French - 20 pages

Eufy RoboVac G10 Quick start guide - French, Italian, Spanish - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info