755732

Eufy RoboVac 11C Pet edition - T2111 Manual

12
Zoom out
Zoom in
Previous page
1/14
Next page
20 21
Replace the Side Brushes
The side brushes may become bent or damaged after being used for a period of time.
Follow the instructions below to replace them.
Use a Phillips screwdriver to unscrew the screws on the side brushes.
Pull off the old side brushes and snap the new ones into place.
Screw down the screws to fasten the side brushes.
Troubleshooting
Problem Solutions
RoboVac cannot be
activated.
•Make sure the main power switch is in the ON position.
•Make sure the battery is fully charged.
•Replace the batteries (2 AAA) in the remote control.
•Make sure the remote control is within range (less than
6 ft/3 m from RoboVac).
•If you still have trouble, turn o the main power switch and
then turn it on.
The remote control
does not work.
•Replace the batteries in the remote control.
•Make sure RoboVac is turned on and fully charged.
•If RoboVac works properly but does not respond to the remote
control’s commands, it may be because the remote control has
not been paired with RoboVac.
In this case, do not dock RoboVac to the Charging Base. Turn o
the main power switch and then:
(1) press and hold on the remote control for 3 seconds;
(2) turn on the main power switch.
You will hear three beeps after successful pairing.
RoboVac stops
working suddenly.
•Check if RoboVac is trapped or stuck on an obstacle.
•Check if the power level is too low.
•If you still have trouble, turn o the main power switch and
then turn it on.
You cannot schedule
cleanings.
•You can set the time and scheduled cleaning time via the
EufyHome app.
•Make sure the scheduled time has been set correctly.
•Check if RoboVac’s power is too low to start cleaning.
Suction power is weak.
•Check if any obstructions are blocking the suction inlet.
•Empty the dust collector.
•Clean the filter with a vacuum cleaner or a cleaning brush.
RoboVac cannot be
charged.
•Check if the Charging Base is plugged into the outlet.
•Dust o the charging contact pins with a dry cloth.
RoboVac cannot
return to the
Charging Base.
•Remove objects within 3 ft/1 m of the left and right side and
within 6 ft/2 m of the front of the Charging Base.
•When RoboVac is in the vicinity of the Charging Base, it will
return more quickly. However, if the Charging Base is located far
away, RoboVac will need more time to return. Please be patient
as it works its way back.
•Clean the charging contact pins.
The rolling brush
does not rotate.
•Clean the rolling brush.
•Check if the rolling brush has been installed properly.
… 12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufy RoboVac 11C Pet edition - T2111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufy RoboVac 11C Pet edition - T2111 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info