520200
6
Zoom out
Zoom in
Previous page
1/8
Next page
6
6 LED indications
LED Color
GSM OK
green
Is lit if the unit is connected to the network and field strength
is appropriate.
Appropriate field strength: 2 (on the scale of 0-5)
GSM / SIM ERROR
red
Is lit continuously if the unit is not connected to the network.
The following cases are possible:
- the GSM antenna is not connected or is faulty
- the SIM card is not inserted, or PIN code request is not
deactivated, or the card is faulty.
CALL IN PROGRESS
green Call or conversation is in progress.
VOLTAGE OUT
red Voltage output activated (e.g. electric lock control)
RELAY CONTROL
red Relay output activated (e.g. gate control)
7 Installation
7.1 Mounting
Measure the GSM signal with your mobile phone. It may happen that in the desired place of
installation the signal strength is not satisfactory. In this case you can move the unit or the
GSM antenna in a more suitable place before installation.
Do not mount the unit where it could be affected by strong electromagnetic disturbances.
Do not mount the unit in wet places or in places with a high degree of humidity.
Connecting the antenna: the GSM antenna can be connected to the SMA connector. The
antenna supplied with the unit provides good transmission under normal reception
circumstances. In case of having signal strength problems or/and wave interference (fading),
use other type of antenna or find a more suitable place for the unit.
Inserting the SIM card: turn the SIM card with the metallic contact surface downwards
towards the panel, and the cut corner should point towards the panel’s center. Insert the
card in this position in the socket and press until it clicks. To remove the SIM card, push it
towards the socket then pull it out.
7.2 Putting into operation
Disable PIN code request, voicemail and missed call notification service on the SIM card.
Enable caller identification and caller ID sending service on the SIM card at the GSM service
provider.
Make sure the SIM card is inserted properly into its socket.
Make sure the antenna is fixed properly into the SMA connector.
Make sure the wiring is done as shown in the wiring diagram.
Power up the unit (12-24V AC/ DC). Make sure the power supply is sufficient for the
operation of the unit. If operating from a 16V AC transformer, the necessary current is min.
300mA (5VA).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Estom AS1-GSM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Estom AS1-GSM in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info