520200
5
Zoom out
Zoom in
Previous page
1/8
Next page
5
5 Settings
Configuration of the unit is possible by sending the appropriate commands in SMS to the
module’s phone number. It is possible to send more commands (settings) in the same SMS, but
the length of the message must not exceed 140 characters! Each message must begin with the
password using the PWD=password# command and each command must end with # character,
else the module does not apply the modifications. The following table contains the configuring
and query commands:
Configuration commands
PWD= 1234#
Password for programming, default setting:1234
PWC=new password#
Changing the password. The password is a 4-digit number.
RESET#
Resetting the settings and the password to default.
TEL=phone number#
Setting the primary phone number to be called when pressing the
button (in international format)
TEL2=phone number#
Secondary telephone number in case the first telephone number
is unavailable.
TIME=duration#
Maximal duration of the conversation. (60-600 seconds)
Default setting: 60 seconds
RTIME= duration#
Duration of the relay output activation.
(1-100 seconds)
Default setting: 3 seconds
VTIME= duration#
Duration of the voltage output (- OUT +) activation.
(1-100 seconds).
Default setting: 5 seconds
RTEL= phone number#
Setting the phone numbers for relay output activation.
(max. 4 user)
STATUS?#
Query of the settings and the phone numbers set for relay output
activation.
Example: PWD=1234#TEL=00363012345678#TIME=120#RTEL=00363012345678#
5.1 Response SMS explanation
After sending the configuration SMS, the unit sends back two SMS messages containing the
modified setting and the phone numbers set for relay output activation. It sends the same
messages when querying the status with the STATUS?# command, as shown in the following
example:
TEL: 00363012345678 the phone number called on button pressing: 00363012345678
CALL TIME: 120 conversation duration (limited to 120 seconds)
SIGNAL: GOOD GSM signal (BAD / GOOD / EXCELLENT).
If the indication is BAD, find a more suitable place for the unit or
the GSM antenna, or a higher gain GSM antenna is necessary.
RTEL: 00363012345678 phone number(s) authorized to activate the relay output.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Estom AS1-GSM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Estom AS1-GSM in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info