Changing from Ethernet Connection to Wi-Fi Connection
Changing to Wi-Fi Connection from the Control Panel
Change the Ethernet connection to Wi-Fi connection from the printer's control panel. e changing connection
method is basically the same as the Wi-Fi connection settings. See the topic in this guide on Wi-Fi connection
settings from the printer's control panel.
Related Information
& “Making Wi-Fi Settings Manually from the Control Panel” on page 23
Changing to Wi-Fi Connection by Using Web Cong
Change the Ethernet connection to Wi-Fi connection by using Web Cong.
1. Access Web
Cong
and select the Network tab > Wi - F i .
When the administrator password has been set, log in as an administrator by entering the user name and
password.
2. Click Setup.
3. Select the SSID for the access point and enter the password.
If the SSID you want to connect to is not displayed, select Enter SSID and enter the SSID.
4. Click Next.
5.
Conrm
the displayed message and click OK.
6. Disconnect the Ethernet cable from the printer.
Note:
You can also change the connection method by using EpsonNet Cong or Epson Device Admin. For details, see the guide or
help for each soware.
Related Information
& “Accessing Web Cong” on page 36
& “EpsonNet Config” on page 115
& “Epson Device Admin” on page 115
Changing from Wi-Fi Connection to Ethernet Connection
Changing the Network Connection to Ethernet from the Control Panel
Follow the steps below to change the network connection to Ethernet from Wi-Fi using the control panel.
1. Select Settings on the home screen.
Administrator's Guide
Appendix
123
