512691
92
Zoom out
Zoom in
Previous page
1/96
Next page
84 TM-J7000/J7100 – TM-J7500/J7600 Manuale dell'utente
Italiano
Pulizia del meccanismo MICR
Ogni 12 mesi circa, pulire la testina MICR con un foglio detergente inumidito.
Usare il seguente foglio detergente o un altro simile disponibile in commercio:
Marca PRESAT (KIC) “CHECK READER CLEANING CARD”.
Nota:
Non usare un foglio detergente adesivo.
Procedere come segue:
1. Caricare un rotolo di carta nella stampante; spegnere la stampante; aprire il
pannello di copertura del rotolo della carta e riaccendere la stampante tenendo
al tempo stesso premuto il pulsante CLEANING.
2. Premere sette volte il pulsante CLEANING; quindi chiudere il pannello di
copertura del rotolo della carta. La stampante stampa il seguente messaggio al
ricevimento della carta e il LED CUT SHEET lampeggia.
**** RECOGNITION MODE ****
Please set check.
(MODO RICOGNIZIONE
Inserire l'assegno.)
3. Inserire il foglio detergente come un normale assegno.
ATTENZIONE:
Verificare che il foglio sia inserito con la faccia rivolta in alto e che sia
inserito nella corretta direzione.
Usare un foglio detergente una sola volta; quindi gettarlo.
Note sull'uso del lettore MICR
Non installare la stampante vicino ad alcun campo magnetico. Prestare particolare
attenzione a dove si installa la periferica di visualizzazione e ricordarsi di
controllare la percentuale di riconoscimento del lettore MICR con la periferica di
visualizzazione a posto.
Verificare che la stampante non sia soggetta ad alcun urto o vibrazione quando esegue
la lettura MICR.
Installazione della piastra di fissaggio per l'adattatore
CA (solo per la stampante TM-J7500/J7600)
Eseguire la procedura di installazione facendo riferimento alla figura M. I numeri
in grassetto si riferiscono ai numeri nella figura.
1. Avvolgere la parte centrale del cavo di alimentazione, come mostrato nella
figura (le misure sono solo approssimate; usarle come guida).
2. Mettere la parte avvolta del cavo di alimentazione dentro la stampante nel
punto indicato dal cerchietto.
3. Sistemare il cavo di alimentazione accanto alle due sporgenze (13) sul fondo
della stampante, per tenere il cavo a posto; quindi, mettere l'alimentatore nella
stampante, con il lato dell'etichetta rivolto in alto.
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson TM-J7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson TM-J7100 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info