212638
10
Zoom out
Zoom in
Previous page
1/11
Next page
Epson Perfection V500 Photo
10 - Epson Perfection V500 Photo 7/07
Reading the Status Light
The status light is next to the ] Start button.
If an error occurs, the scanner stops operating and the status
light flashes orange. This indicates one of the following
problems:
The scanner is not connected to your computer properly or
your software is not fully installed. See the Start Here sheet
that came with your scanner for instructions on installing
the software and connecting the scanner to your computer.
The scanner and/or the transparency unit transportation
lock is locked. Slide the lock to the unlock position.
The scanner cover cable or optional Automatic Document
Feeder cable is not connected to the scanner’s
OPTION
port. Connect the cable to the port.
Note:
Before connecting or disconnecting the scanner cover cable or
the Automatic Document Feeder cable, turn off the scanner
using its power switch.
After trying these solutions, turn off the scanner using its power
switch, then turn it back on. If the status light is still flashing:
The scanner may be malfunctioning.
The scanner light source may need to be replaced.
The connected optional equipment may be malfunctioning.
Contact Epson. See the on-screen User’s Guide for details.
Transporting the Scanner
Before transporting the scanner for a long distance or storing it
for an extended period of time, you need to lock the scanner’s
carriage and transparency unit to prevent damage.
1. Plug in the scanner, connect it to your computer, turn on
the scanner using its power switch, and wait until the
carriage moves to the home position (near the cover hinge).
While the status light is green, turn off the scanner using its
power switch.
Note:
If the optional ADF is installed, make sure the scanner is turned
off, then disconnect the ADF’s cable and remove the ADF from
the scanner. Place the scanner cover on the scanner, but do not
connect the cover cable.
2. Open the scanner cover and slide the transparency unit
transportation lock to the locked position. Then close the
scanner cover.
3. If the cover cable is attached, disconnect it.
4. Disconnect the USB cable.
Color Indicator Status Meaning
Green On Ready to scan images.
Flashing Initializing or scanning.
Orange Flashing An error has occurred. See the on-line
User’s Guide for more information.
(None) Off The scanner is off.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson perfection v500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson perfection v500 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info