675425

Epson LW-K400 Manual

4
Zoom out
Zoom in
Previous page
1/9
Next page
4
LW-K400 User’s Guide
6. Printing labels
1. Press .
The length of the label to print and the number of prints appear,
and printing starts.
2. When the tape stops, press the "Cut Button" to cut the tape.
c
Do not press the "Cut Button" before printing is complete.
Printing multiple copies (end cut)
1. Press .
2. Highlight "Copies" using the cursor keys, then press
.
3. Enter the number of copies using the cursor keys or numeric keys.
4. Press
to start printing.
5. When printing stops, press
U to cut the tape. A cut mark will be
printed between each copy.
Using scissors, cut along the marks to separate each label.
Printing multiple copies (each cut)
1. Press .
2. Highlight "Set cut mode" using the cursor keys, then press
.
3. Select "Each label" using the cursor keys, then press
.
4. Highlight "Copies" using the cursor keys, then press
.
5. Enter the number of copies using the cursor keys or numeric keys,
then press
.
6. When you are prompted to cut the tape, press the
U button.
After each cut using the U button, printing of the next copy
starts.
Adjusting print density
1. When the power is o, press + .
2. Adjust print density with
, and press .
MEMO
In general, please set the value to the default; "0".
7. Attaching labels
1. Peel o the backing paper.
2. Attach the label and rub it rmly.
J Turn the power o after use
1. Press .
Batteries:
Take them out if not in use for a long time.
AC adapter:
Disconnect from the outlet and the product.
Editing characters
Press character keys and enter text.
sPart Names and Functions
Text is entered from the cursor position. sDisplay
c
To keep the already entered text, rst move the cursor to a
number to which no text is entered yet with + or + ,
then enter text.
J Switching upper case or lower case
1. Press + .
The setting is indicated on the display. Characters are set to upper
case or lower case.
To capitalise partially: Enter with
pressed.
J Deleting characters
1. Press .
Deletes one character backward.
J Breaking lines
1. Press .
Breaks the line from the character next to the cursor.
J Deleting text
1. Press + .
2. When a conrmation message appears, press
.
Text will be deleted.
J Conrming text
1. Press .
Text appears on the display.
You can check the text and the length of the label.
But the print image cannot be conrmed.
J Adding characters with an accent mark to the label
If there is a choice of characters with an accent mark, they are indicated
on the display.
Example: École
1. Press
+ .
2. Press
.
A choice of characters with an accent mark appears.
3. Select an item with
, and press .
Go on and enter the next character.
Characters with an accent mark sSymbol List
J Adding a punctuation mark to the label
Select from the following two methods.
1. Press
.
Each press shows the next mark.
Available marks
1. Press + .
Each press shows the next mark.
Available marks
J Adding a symbol to the label
1. Press .
2. When the category appears, select an item with
, and press
.
3. When symbols appear, select a symbol with
, and press .
Available symbols sSymbol List
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson LW-K400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson LW-K400 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson LW-K400

Epson LW-K400 User Manual - German - 9 pages

Epson LW-K400 User Manual - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info