❏ If a moiré (cross-hatch) pattern appears, change the reduce and enlarge setting or place the original at a slightly
dierent
angle.
❏ When the paper is smeared, lower the copy density setting.
Related Information
&
“Cleaning the Paper Path for Ink Smear” on page 88
& “Cleaning the Scanner Glass” on page 90
& “Cleaning the ADF” on page 88
& “Print Quality is Poor” on page 114
& “Copy Mode” on page 16
An Image of the Reverse Side of the Original Appears in the Copied
Image
❏ For a thin original, place the original on the scanner glass and then place a piece of black paper over it.
❏ Lower the copy density setting on the control panel.
Related Information
& “Copy Mode” on page 16
The Position, Size, or Margins of the Printout Are Incorrect
❏ Load paper in the correct direction, and slide the edge guide against the edges of the paper.
❏ When placing the originals on the scanner glass, align the corner of the original with the corner indicated by a
symbol on the frame of the scanner glass. If the edges of the copy are cropped o, move the original slightly
away from the corner.
❏ Clean the scanner glass and the document cover. If there is dust or stains on the glass, the copy area may extend
to include the dust or stains, resulting in the wrong printing position or small images.
❏ Select the appropriate size setting for the original on the control panel.
❏ Select the appropriate paper size setting on the control panel or in the printer driver.
❏ Adjust the margin setting in the application so that it falls within the printable area.
Related Information
& “Loading Paper in the Paper Cassette” on page 27
& “Placing Originals” on page 31
& “Cleaning the Scanner Glass” on page 90
& “Printable Area” on page 128
Paper Is Smeared or Scued
Check the following if the paper is smeared or scued when printing.
❏ Clean the paper path.
User's Guide
Solving Problems
116