Flashing dots do not appear even if calibration is started
CheckRemedy
The computer screen is being redisplayed.End all applications such as Flash animations that redisplay the screen and then restart Easy Interactive Function.
The dots are not displayed if the projector is not detected by the
computer.
Check that the projector and computer are connected correctly and then restart Easy Interactive Function.
The dots do not change from flashing to always lit.
CheckRemedy
The projector surface information cannot be received accurately
because there is another light source nearby.
Move the light source away from the projector or change the installation location of the projector.
The projector surface information cannot be received accurately if
the projector position is too close to the projection surface.
Check the installation position of the projector.
The dots change from flashing to always lit automatically
CheckRemedy
The Easy Interactive Pen has been disabled because the surrounding
light source state is unstable.
Change the installation position of the projector or turn off the light source.
Other problems
No sound can be heard or the sound is faint
CheckRemedy
Is the audio source connected correctly?Disconnect the cable from the Audio port, and then reconnect the cable.
Is the volume adjusted to the minimum setting?Adjust the volume so that sound can be heard. sp.76sQuick Start Guide
Is A/V Mute active?Press the [A/V Mute] button on the remote control to cancel A/V Mute. sp.40
Is the audio cable's specification "No resistance"?When using a commercially available audio cable, make sure it is labeled "No resistance".
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Epson eb 450w at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Epson eb 450w in the language / languages: English as an attachment in your email.
The manual is 6,03 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.