619951
1
Zoom out
Zoom in
Previous page
1/2
Next page
Quick Installation Guide
EnGenius Europe | Veldzigt 28, 3454 PW De Meern,
Netherlands | 0900-WIFIABC | www.wiabc.com
Disclaimer: Information may be subject to changes without prior notication.
Follow us
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
ECB1750
Package content
Unpack the box and verify the content:
- ECB1750
- RJ-45 Ethernet-cable
- 12V/1A 100V~240V Power adaptor
- 3*2.4GHz detachable antenne
- 3*5GHz detachable antenne
- Quick Installation Guide
- CD with instruction manual
Minimum requirements
- Broadband Internet Service (Cable or DSL modem)
- Internet browser (Internet Explorer, Safari, Firefox, Chrome)
Hardware installation
1. Please install the antennas as shown below.
2. Connect one end of the Ethernet cable into LAN port of the ECB1750 and
the other end to the computer that will use the ECB1750. Ensure that the cable
is securely connected to both the ECB1750 and the computer.
3. Connect the power adaptor DC inlet to the DC-IN port of the ECB1750 and
the power adapter in to the electrical outlet.
Note: The ECB1750 supports
both IEEE 802.3at PoE (power
over Ethernet) and regular
power adapter. You should
use either one as the power
source. Please do not apply
both at the same time.
Computer setup
1. After ensuring the EnGenius device is powered on and plugged in, ensure
that your computer is on.
2. For the next steps, refer to your operating system user manual.
3. Once your computer is on, ensure that your TCP/IP is set to ON or
ENABLED. In the control panel, double click network connections and then dou-
ble click on the connection of your Network Interface Card (NIC). Select Internet
Protocal (TCP/IP) and then click on the properties button.
4. If your PC is already on a computer network, ensure that you have set it to
a Static IP adress on the interface (or Ethernet card that will use the ECB1750).
Set it as 192.168.1.21 and the subnet mask address as 255.255.255.0.
Select ‘Use the following IP address’-radio button. Once the computer has been
prepared, proceed to setting up the ECB1750.
EAP1750 setup
1. To configure ECB1750, open a web browser (example: Microsoft Internet
Explorer, Mozilla Firefox, Google Chrome, etc.)
2. In the adress bar of the web browser, enter: 192.168.1.1 (the default IP
address of the ECB1750) and hit ENTER.
3. A login screen will appear. By default, the username of the ECB1750 is
admin and the password is admin. Enter the current username and password
of the ECB1750 and then click ‘Login’. Refer to the ECB1750 user manual on
how to change the username and password.
4. After clicking ‘Login’ with the correct username an password, the ECB1750
main menu will appear. If you are successful, proceed to setting up the wireless
connection.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius ECB1750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius ECB1750 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius ECB1750

Engenius ECB1750 User Manual - English - 76 pages

Engenius ECB1750 Installation Guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info