619952
1
Zoom out
Zoom in
Previous page
1/2
Next page
Quick Installation Guide
EnGenius Europe | Veldzigt 28, 3454 PW De Meern,
Netherlands | 0900-WIFIABC | www.wiabc.com
Disclaimer: Information may be subject to changes without prior notication.
Follow us
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
ECB1200
Package content
Unpack the box and verify the content:
- ECB1200
- RJ-45 Ethernet-cable
- 12V/1A 100V~240V Power adaptor
- 2* 2.4GHz detachable antenne
- 2* 5GHz detachable antenne
- Quick Installation Guide
- CD with instruction manual and EZ controller
Minimum requirements
- Broadband Internet Service (Cable or DSL modem)
- Internet browser (Internet Explorer, Safari, Firefox, Chrome)
Setting up the ECB1200
After verifying the contents of the box, continue on to setting up the ECB1200.
Hardware installation
1. Please install the antennas as shown below.
2. Connect one end of the Ethernet cable into the LAN port of the ECB1200
and the other end to the computer that will use the ECB1200. Ensure that the
cable is securely connected to both the ECB1200 and the computer.
3. Connect the power adaptor DC inlet to the DC-IN port of the ECB1200 and
the power adapter in to the electrical outlet.
Note: The ECB1200 supports both
IEEE802.3at PoE (Power-over-Ethernet) and
regular power adapter. You should use either
one as the power source. Please do not apply
both at the same time.
Computer setup
1. After ensuring the EnGenius device is powered on and plugged in, ensure
that your computer is on.
2. For the next steps, refer to your operating system user manual.
3. Once your computer is on, ensure that your TCP/IP is set to ‘ON’ or
ENABLED’. In the control panel, double click network connections and then
double click on the connection of your Network Interface Card (NIC). Select
Internet Protocol (TCP/IP) and then click on the properties button.
4. If your PC is already on a computer network, ensure that you have set it to
a Static IP adress on the interface (or Ethernet card that will use the ECB1200).
Set as 192.168.1.21 and the subnet mask address as 255.255.255.0.
Select ‘Use the following IP address’-radio button. Once the computer has been
prepared, proceed to setting up the ECB1200.
EAP1200 setup
1. To configure ECB1200, open a web browser (example: Microsoft Internet
Explorer, Mozilla Firefox, Google Chrome, etc.)
2. In the adress bar of the web browser, enter: 192.168.1.1 (the default IP
address of the ECB1200) and hit ENTER.
3. A login screen will appear. By default, the username of the ECB1200 is
admin and the password is admin. Enter the current username and password
of the ECB1200 and then click ‘Login’. Refer to the ECB1200 user manual on
how to change the username and password.
4. After clicking ‘Login’ with the correct username an password, the ECB1200
main menu will appear. If you are successful, proceed to setting up the wireless
connection.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius ECB1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius ECB1200 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius ECB1200

Engenius ECB1200 Installation Guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info