The ELROProDoor/window sensor AP55MA11 is designed for use with the ELRO 10-ZONE PRO
ALARM SYSTEM AP5500. The Magnetic sensorconsists of two parts; a Detector and a Magnet. They
are designed to be fitted to doors or windows with the Magnet mounted on the moving/opening part.
Mounting the PRO door/windowsensor:
Decide which doors/windows are to be protected by fitting
Magnetic Contact Sensors, (usually the front and back doors.
Additional sensorsmay also be fitted where required to other
vulnerable doors or windows, (e.g. garage, patio/conservatory
doors etc).Ensure that the position selected for the Magnetic
Contact detector is within effective range of the Control Panel,
(refer to ‘Testing the Control Panel & Remote Control’).
Remove the battery holder, and mount the detector using
either the adhesivetape or screws. Fit the Magnet to the
moving part of the door/window opposite the Detector. Ensure
that theparallel gapbetween the Magnet and Sensoris less
than 10mm and thatthe arrow on the Magnet is pointing to-
wardsand aligned with the mark on.
Programming the Alarm Panel:
Press , ? ? ? ? (???? standard Master Password), display show 1.USER SETUP.
1.USER SETUP. Press ,until in display: 3. ZONE SETTING. No we can choose:
Zone Setup (Z1-10) ; fill in the Zone Number you defined in door/window sensor!
After setting we leave the program modus:pressuntil you see in the display:DISARM READY
For more information about the ELRO 10-ZONE PRO ALARM SYSTEM AP5500 visit www.elro.eu
DIP 9 DIP 10DIP 11
Zone 1OFFOFFOFF
Zone 2OFFOFFON
Zone 3OFFONOFF
Zone 4OFFONON
Zone 5ONOFFOFF
Zone 6ONOFFON
Name
No Name
You can select a room name, or leave ‘no name’
Type
Intruder
Normal sensor will be ‘intruder’.
Final Exit
OFF
‘OFF’
Chime
OFF
‘OFF’
Entry Delay Zone 1
Zone 2-10
ON, 30s
OFF
Depends if you have to pass the
when you leave, or come back!
Part-Arm 1
OFF
Do you want switch this sensor on in PARM1
Part-Arm 2
OFF
Do you want switch this sensor on in PARM2
Walk Through
OFF
‘OFF’
O
E
1 2 3 4
Open the sensor, take out the battery
connector, and place the battery! Check the
house code; same as PIR and Remote Dip 1-
8 from 1-12. Select the Zone you want: setting
Dip 9-11 according the overview below.
Mark
the Zone number on the magnet.
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Elro AP55MA at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Elro AP55MA in the language / languages: English as an attachment in your email.
The manual is 0,31 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.