708646

Elro AG400011 - Home Alarm System Manual

3
Zoom out
Zoom in
Previous page
1/6
Next page
3. You will receive an SMS message saying the phone number was set successfully.
4. Your alarm panel can now be controlled from your phone via app and SMS (Step 9).
1. The alarm panel’s built-in microphone can record your message.
On the alarm panel enter the following:
2. When the record button flashes green, speak into the alarm panel’s microphone to
record a brief alarm message. The maximum length of the message is 10 seconds.
3. When the light stops flashing, the panel will play back the alert message.
Note: Included accessories are pre-binded with the alarm panel at
the factory and ready for use.
1. Test the communication link by pressing disarm on the
remote
2. The red indicator on the remote should light up, and the alarm
panel should sound a long beep.
1. RFID tags can be used to disarm the system.
2. Arm the system using the remote control, ensure that the
ARM icon lights up.
3. Hold the RFID tag near the panel in front of the small hand icon
after arming the system.
4. You should hear a long beep and the disarm indicator should
light up.
5. Several RFID tags can be added and each can have a different number.
1. Put the alarm panel in test mode by inputting:
The disarmed icon will flash when in this mode.
2. Press and release the tamper switch inside the PIR motion sensor (pictured on the right) until
the alarm panel makes a chime sound.
3. Place the rear cover back on the PIR motion sensor.
1. Leave the system in test mode.
2. Press and release the tamper switch on the back of the
sensor until the alarm panel makes a chime sound.
With the "ELRO Home Alarm" app you can remotely access the ELRO
Home alarm system from your smartphone. You can easily disarm and
(partially) arm your alarm system, and receive alert messages on your
smartphone when emergencies occur.
1. On the Google Play Store or Apple App Store, search for “ELRO Home Alarm” and install the
app.
2. Add a new system and choose a name, then enter the phone number belonging to the SIM
card you have inserted into the alarm panel.
3. Select the newly created system from the home screen (Image D below)
4. Then click on the status button to request the current status of the system. (Image E below)
5. A pop-up will appear asking to send an SMS to request the current system status. Select ok.
(Image F below)
6. An SMS with the system status will be sent to your phone. (Image G below)
Step 7 – Testing the PIR motion sensor (SP831)
Step 9 – Smartphone app Setup
Step 4 – Record an alert voice message
Step 5 – Test the remote control (SR401 )
Step 6 – Test the RFID key tag
Step 8 – Test the door / window contact (SM831)
1234
1234
03
Important: If the siren goes off at any point during the setup, press
the Disarm button on the remote to immediately turn off the siren
Important: Make sure you’re installing the app on the same phone you used in Step 2.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro AG400011 - Home Alarm System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro AG400011 - Home Alarm System in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elro AG400011 - Home Alarm System

Elro AG400011 - Home Alarm System User Manual - English - 15 pages

Elro AG400011 - Home Alarm System Quick start guide - German - 5 pages

Elro AG400011 - Home Alarm System User Manual - German - 12 pages

Elro AG400011 - Home Alarm System Quick start guide - Dutch - 5 pages

Elro AG400011 - Home Alarm System User Manual - Dutch - 236 pages

Elro AG400011 - Home Alarm System Quick start guide - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info