614484
86
Zoom out
Zoom in
Previous page
1/87
Next page
82
Problem
The fabric puckers.
The LCD screen is not clear.
The touch panel keys do not
work correctly.
The PC card or USB
memory does not work.
Communication with the PC
does not work.
The thread breakage
warning appears though the
thread is not broken.
Cause
1. The needle thread tension is too tight.
2. The fabric is not stretched tight enough in the
hoop.
3. A stabilizer is not used.
1. The brightness of the LCD screen is not
adjusted properly.
1. The key position is out of alignment.
2. The control system does not work correctly.
1. The PC card or USB memory is not inserted
properly.
2. The memory bank of the PC card or USB
memory is damaged.
1. The USB cable is not connected properly.
2. The existing machine ID number is used.
1. The thread detector sensitivity is too sensitive.
Reference
See pages 30.
See page 22.
See page 15.
See pages 24, 61.
See page 62.
Turn the power off and
turn it on again.
See pages 73, 74.
See pages 58, 64.
See page 14.
See pages 57, 63.
See pages 59, 68.
Troubleshooting
NOTE:
It is not abnormal that a slight humming sound is comming
from the internal motors when the machine stands still.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXpressive 940 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXpressive 940 in the language / languages: English as an attachment in your email.

The manual is 5,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info