614484
85
Zoom out
Zoom in
Previous page
1/87
Next page
81
Problem
The machine does not run.
The machine is noisy.
The needle thread breaks.
The bobbin thread breaks.
The needle breaks.
Skipped stitches
Embroidery pattern is
distorted or not aligned.
The tread forms loops.
Cause
1. The machine is not plugged in correctly.
2. The threads are jammed in the hook or
around the take-up lever.
3. A confirmation message or an error message
is displayed.
4. The control system does not work correctly.
1. Lint has accumulated in the hook.
2. The machine runs out of oil.
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is not inserted properly.
5. Stitch density is too dense.
6. Poor quality threads are used.
7. The bobbin thread is not threaded properly.
1. The bobbin thread is not threaded properly.
2. Lint has accumulated in the hook.
3. The bobbin is not inserted into the bobbin
case properly.
4. The bobbin or bobbin case has a scratch or
nick.
1. The needle is not inserted properly.
2. The needle is bent or blunt.
3. The needle clamp screw is loose.
4. The needle thread tension is too tight.
5. Stitch density is too dense.
6. The needle thread is not threaded properly.
1. The needle is not inserted properly.
2. The needle is bent or blunt.
3. The needle thread is not threaded properly.
4. The fabric is not stretched tight enough in the
hoop.
1. The needle thread tension is too tight.
2. The fabric is not stretched tight enough in the
hoop.
3. A stabilizer is not used.
4. The fabric is caught or trapped while stitching.
5. The threads are tangled on the bottom side of
the fabric.
6. Short stitches are eliminated with the “Ignore
short stitches” setting.
1. The needle thread tension is too loose.
2. The bobbin is not inserted properly.
3. A poor quality thread is used.
Reference
See page 13.
Remove jamming threads.
Follow the message to turn
it off.
Turn the power off and turn
it on again.
See page 76.
See page 78.
See page 19.
See page 30.
See page 31.
See page 31.
Modify the pattern by using
an embroidery software.
Use a high quality threads.
See page 17.
See page 17.
See page 76.
See page 17.
Replace the bobbin or
bobbin case.
See page 31.
See page 31.
See page 31.
See page 30.
Modify the pattern by using
an embroidery software.
See page 19.
See page 31.
See page 31.
See page 19.
See page 22.
See page 30.
See page 22.
See page 15.
See page 27.
Cut off and remove the
tangled threads.
See pages 59, 67.
See page 30.
See page 17.
Use a high quality thread.
Troubleshooting
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXpressive 940 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXpressive 940 in the language / languages: English as an attachment in your email.

The manual is 5,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info