600925

Elektrobock PT 32 GST Manual

8
Zoom out
Zoom in
Previous page
1/10
Next page
16
LOCK
17
KEYCOdE
18
SERVICE dAY
19
PASSWORd
YOUR CODE
20
VERSION
TEMP. IN AUTO
TEMP IN MANU
OPER HOURS H.C.
TEMP 2Nd SENS
8
20
VERSION (restoring the default settings)
Firmware version, informative parameter only.
If you press the “ “ button long (for about 3 s), the RESET message appears shortly on the LCD and
the thermostat returns to the default settings!
KEY LOCK
This is used for locking the controls as a protection against undesirable interference of a foreign person.
16
KEY CODE
This constant can be set if CONST 16 = YES. It is used for setting the code by which you will be able to
activate the controls. Set a four-digit combination (range from 0 to 9).
The keys will be locked within 1 minute (after opening the basic display). The “ ” symbol appears on
the LCD. If you press the “
“ or “ “ button, the LCD asks you to enter the key code; after entering
the correct code, you are able to make any changes (the controls are functional again). The controls will
automatically be locked again after you fi nish the setting (within approx. 1 min).
17
BOILER INSPECTION REMINDER
Set the date on which you want to be informed about the necessity of the prescribed boiler service. At the
required time, the “MAINTENANCE NECESSARY” message and the “ ” symbol will appear on the bot-
tom line of the LCD (you can cancel the message by setting a new date for the next boiler maintenance!).
18
Set YES/NO by turning the “ “ button and press the “ “ button to confi rm.
Gradually set 4 digits by turning the “
“ button; confi rm each setting with the “ “ button.
RECOMMENDATION: - Record the key code in the table
- You can cancel the code by setting CONST 16 to NO, or by restoring the
default settings of the thermostat (see CONST 20).
Gradually set the day, month and year by turning the“ “ button, confi rm each setting with the “ “.
(NO set by default)
(1.1.2032 set by default)
19
PASSWORD
(not set by default)
It is used for locking the constants related to the given control settings. Suitable for service technicians.
After a numerical code has been entered, the user cannot change constants No. 4, 5, 6 and 10.
If you open the CONST mode and browse the constants, the “ ” symbol appears next to the constants
locked; if you turn the “ “ button, the password is required! Unless you enter the password, the con-
stants remain locked. To try to unlock them again, you must exit the CONST mode and browse up the
constant locked again.
Turning the “ “ button, gradually enter four digits and confi rm each setting with the “ “.
USER TIPS
QUICK CHANGE OF REQUIRED TEMPERATURE / PROGRAM IN THE AUTO MODE
Press twice the
“ “ ; the required temperature starts fl ashing on the display. Change the required tempera-
ture by turning the “ “ button and press the “ “. The change will last until the next program change.
Press twice the “ “; the required temperature starts fl ashing on the display. Change the required tempe-
rature by turning the “ “ button and press the “ “. The change will last until the next manual temperature
change.
Press thrice“ “, the setting programm starts fl ashing on the display. Change it by turning “ “
button and press the
“ “.
SMS form: Temp xx (where xx are only integers within the range of CONST2 and CONST3)
Change of the desired temperature; the change will last until the next temperature change given
by the program.
QUICK CHANGE OF REQUIRED TEMPERATURE IN THE MANU MODE
SMS form: Temp xx (where xx are only integers within the range of CONST2 and CONST3)
Change of the desired temperature; the change will be permanent.
OPERATIONAL HOURS
Push the “ “ button four times. The boiler operating hours appear on the LCD. The fi gure on the picture
means 906 hours 43 minutes.
Resetting the counter:
When operational hours are displayed, turn the “ “ button anti-clockwise.
EXTERNAL SENSOR TEMPERATURE
Push the “
“ button fi ve times. The current temperature of the external sensor appears on the LCD; the
value is only informative, and appears only if the external sensor is monitoring the maximum fl oor temperature
(see CONST 12, page 7).
… 8


Need help? Post your question in this forum.

Forumrules
1

Forum

elektrobock-pt-32-gst

Reset search

  • My device has worked well for many years. Recently changed the SIM card and i keep getting SMS Disconnected as a message.....what could be the solution to resolve please? Submitted on 23-11-2020 at 14:55

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elektrobock PT 32 GST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elektrobock PT 32 GST in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elektrobock PT 32 GST

Elektrobock PT 32 GST User Manual - German - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info