651725

Elektrobock BPT37 Manual

12
Zoom out
Zoom in
Previous page
1/14
Next page
SETTING DECSRIPTION FOR GSM MODULE GST1
FOR CORRECT COMMISSIONING, THE FOLLOWING PROCEDURE MUST BE OBSERVED!
1. Install and set the thermostat according to the instructions
2. Constants 11, 12 and 13 must be set on the thermostat as follows:
PHONE NUMBER SETTING – CONST 12
The phone number to which SMS messages about the thermostat status
should be sent must be entered in the international format (0420123456789).
(Enter the phone number to which all feedback reports should be sent.)
Set with the buttons and confirm with the .
You can browse the preset numbers by means of .
+/- H
+/- T i
SETTING THE PIN CODE OF THE SIM CARD USED – CONST 13
Set the PIN code of the SIM card inserted in the GST1 module.
Set with the buttons and confirm with the .
You can browse the preset numbers by means of .
+/- H
+/- T i
Thanks to this function, you do not have to remember the PIN code of the phone
card inserted in the module connected to the thermostat.
3. Insert an activated SIM card in the GST1 module. The SIM card holder is located in the rear part, once
you open the cover at the arrow (see page 2).
4. Connect the thermostat to the GST1 module by means of the (enclosed) data cable; then connect the
module to the 230 V / 50 Hz mains via the supply unit!
12
5. After orange LED start lit, push the button on the thermostat to test correct connection.
One of the following messages appears on the thermostat display:
Test
Indicating correct connection of the module Indicating correct connection of the module and
PIN code setting
Module not connected, bad connection of the
module!
Indicating correct connection of the module, but
bad PIN code setting! You must disconnect the
module, RESET the thermostat and enter the
correct PIN code!
CONTROL OPTION BY MEANS OF THE GSM MODULE – CONST 11
Choose the GSM: A option with the buttons and confirm with the .
+/- T i
… 12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elektrobock BPT37 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elektrobock BPT37 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info