629290

Electronics Line Prime Manual

30
Zoom out
Zoom in
Previous page
1/32
Next page
-30-
G
Global Chime
A feature that enables/disables the Chime feature for the entire
system – see Chime.
H
HA Units
Home Automation Units (abbr.). The lights and appliances in the
home that are controlled by the optional Home Automation feature.
Home Automation
An optional feature that enables the user to control electrical
appliances and lights via the control panel.
I
Instant Set
An setting method that cancels the entry delay after the system has
been Part or Perimeter armed.
K
Keyfob
Handheld wireless transmitters used to remotely control the system.
L
Limited Code
A user code that automatically expires 24 hours after it is
programmed.
Log
See Event Log
M
Master Code
The only user code with the ability to program other user codes. The
Master code also has exclusive access to specific system functions.
Medical
Emergency
A type of alarm that informs the monitoring service that the user is in
need of medical assistance.
Message Center
An optional feature that enables users to record messages to be
played back by other users.
N
Non-Controlled
Code
A user code that does not cause the system to notify the monitoring
service when used to set or unset. The system only reports if the
code is used to unset after an alarm.
O
One-Key Setting
Setting the system without the need for a valid user code.
P
Panic Alarm
A user initiated event that alerts the monitoring service in the event
of an emergency.
Part Setting
An setting method that is designed to activate a certain section of
the premises.
Perimeter Setting
An setting method that is designed to activate the sensors protecting
the doors and windows while enabling residents to move freely on
the premises.
R
Ready
The state in which all zones are closed and the system is ready to
be armed.
Restore
The restoral of a trouble condition to its normal state. For example, if
AC power is reconnected, an AC Loss Restore event code is sent to
the central station.
… 30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electronics Line Prime at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electronics Line Prime in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info