629290

Electronics Line Prime Manual

29
Zoom out
Zoom in
Previous page
1/32
Next page
-29-
Appendix B: Glossary
24hr Zone
A sensor which is always active regardless of whether the system is
armed or unset.
A
Armed
The state during which the security system is activated. In most
cases, when the system is armed, triggering a sensor generates an
alarm.
Setting Keys
The three keys on the front panel or keypad that activate one of the
system’s setting options.
B
Bypassed Zone
A sensor which is ignored by the system. No alarm is generated
from a bypassed zone even if triggered when the system is armed.
C
Cancel Key
A key on the wireless keypad that causes the system to disregard
any partially entered code or command that may have mistakenly
been entered.
Cellular
Communication
Monitoring and control via a cellular network.
Chime
A feature that provides audible annunciation when specific sensors
are activated.
Code
see User Code
Controlled Code
A user code that causes the system to notify the monitoring service
when used to set or unset.
D
Delay
The exit/entry delay times that allow the user to set or unset the
system without generating an alarm.
Descriptor
Custom labels programmed for each user code, zone, keyfob,
keypad etc.
Unset
The state during which the security system is deactivated. During
unset only sensors that are defined as 24hr, Panic, Medical, Fire,
Gas, Flood and Environmental are capable of generating an alarm.
Duress Code
A user code that generates a silent alarm to indicate that the user is
being forced to operate the system.
E
Entry Delay
See Delay
Event Log
A browsable record of events that have occurred within the system.
Exit Delay
See Delay
F
Follow Me
A feature that enables users to receive notification to their telephone
that an event has occurred in the system.
Forced Setting
Setting before the system is ready. If the system is not secured by
the time that the exit delay expires, an alarm is generated.
Front Panel
The main interface located on the front of the control panel
consisting of an LCD keypad.
Full Setting
An setting method that activates the entire system when the
premises are vacated.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electronics Line Prime at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electronics Line Prime in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info