580177

Electronics Line EL-2601 Manual

2
Zoom out
Zoom in
Previous page
1/7
Next page
EL-2601 Wireless magnetic contact – Funkmagnetkontakt – Contact magnétique – Magneet contact Conrad No: 1276474
9. Montieren Sie die hintere Abdeckung mit zwei Schrauben und setzen Sie die Leiterplatte zurück. Benutzen Sie ISO 7050
(ST3.5 x 22) oder ähnliche
angesenkte Schrauben, sodaß der Schraubenkopf die Leiterplatte nicht berührt – siehe Abbildung B.4.
10. Um das Magnetgehäuse zu öffnen, stecken Sie einen kleinen Schraubenzieher in einem der hervorgehenden Schlitze, der
sich an den beiden Enden der Magnetrückseitenbedeckungen befindet, hinein. Heben Sie ihn ab, um ihn von der vorderen
Bedeckung zu trennen.
11. Montieren Sie die Rückseitenbedeckung des Magnetes, indem Sie zwei Schrauben benutzen. Versichern Sie sich,
daß die Führungslinie auf dem Magneten richtig mit der Führungslinie vom Überträger ausgerichtet ist.
12. Testen Sie den Überträger, indem Sie sich versichern das die LED-Anzeige an ist, wenn Sie eine Tür oder einen
Fenster öffnen, und auch wieder wenn Sie die schließen.
13. Schließen Sie die vorderen Bedeckungen des Überträgers und des Magnetens.
English
MAGNETIC CONTACT (EL-2601)
The EL2601 is a magnetic contact designed for installation on doors and windows.
This product is a part of the EL Secuplace series, and operates together
with the Secuplace alarm system. When you wish to know more about the
complete system, its possibilities and its settings, then you can check out the
installation manual or visit
www.electronic-lines.com
SAFETY WARNINGS
• To prevent short circuits, this product should only be used inside and only in dry
spaces. Do not expose the components to rain or moisture. Do not use the product
close to a bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures
or bright light sources.
• In case of improper usage or if you have altered and repaired the product
yourself, all guarantees expire. Electronics Line does not accept responsibility in the case
of improper usage of the product or when the product is used for purposes other
than specified. Electronics Line does not accept responsibility for additional damage other
than covered by the legal product responsibility.
• This product is not a toy. Keep out of reach of children.
• Keep batteries out of the reach of children. Dispose of batteries as chemical
waste. Never use old and new batteries or different types of batteries together.
Remove the batteries when you are not using the system for a longer period of
time. Check the polarity (+/-) of the batteries when inserting them in the product.
Wrong positioning can cause an explosion.
• Automatic switching devices provide comfort, but can also be dangerous. They
can surprise people or can ignite clothing hanging over an electric heat source.
Please be careful and take appropriate measures to avoid accidents.
INSTALLATION PROCEDURE
1.To install magnetic contacts.1. To open the housing, insert a small screwdriver
at the bottom of the unit between the front and back cover and twist the
screwdriver to release the cove
2. Remove the divider separating the battery from the contacts on the battery
holder. When you apply power and the Tamper switch is open, the EL 2601
TECHNISCHEN DATEN
Antenne: Integrierte Peitsche
Frequenz: 868,35MHz FM
Strom: 3.6V ½ AA Lithiumbatterie
Aktueller Stromverbrauch: 25mA (in Transmission)
10μA (in Bereitschaft)
Schleifeneingangsspannungsreihe: 0-15VDC/Wechselstrom (peak to peak)
RFI Immunität: 40V/m
Betriebstemperatur: 0 bis 60°C
Abmessungen: 65 x 30 x 25mm
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electronics Line EL-2601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electronics Line EL-2601 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info