Manual Eks Microsense Infrared Thermometer 8009 (page 4 of 30) (English, German, Danish, French, Italian, Portuguese, Spanish)

495427

Zoom out

Zoom in

1/30

Battery replacement

When the battery icon in the display ashes, the battery should be replaced.

• To open the battery cover: Insert a pointed object, such as a pin, into the battery pin hole.

At the same time push the battery cover backwards.

• Flip out the battery with a small screwdriver.

• Insert the new battery under the metal hook on the left side and

press the right side of the battery down until it clicks into place.

• Replace the battery cover.

! The positive side ( + ) up and the negative ( - )side down.

! Keep the battery away from children.

Display message Problem Solution

°C / °F switch:

When the thermometer is turned o, press the SCAN button and then press and hold the

“ON/MEM” button until the icon for °C (Centigrade) shows in the display. The same procedure

to change to °F (Fahrenheit).

Care & cleaning

The probe is the most delicate part of the thermometer. Handle with care when cleaning the

lens to avoid damage.

• Storage temperature range: -20~50°C (-4~122°F), RH≤85%

• Keep the unit dry and away from any liquids and direct sunlight.

• The probe should not be submerged in liquids.

• If the device is accidentally used without a probe cover, clean it as follows: use a cotton

swab with alcohol (70% concentration) to clean the lens.

• Allow the probe to dry completely for at least 1 minute.

Note:

• If the device is dropped, please check that it is not damaged. If you are not sure if it is

damaged, please send the complete devise to the nearest retailer for recalibration.

• If you hold the thermometer for a long time it may cause the devise to give a higher

room temperature reading. This can even aect body temperature measurement to be

lower than usual.

Device stabilization in progress Wait until stops ashing.

Battery is low and no more Replace the battery.

measurements are possible.

Measurement before device Wait until stops ashing

stabilization.

The device shows a rapid room Allow the thermometer to rest in a

temperature change room for at least 30 minutes at room

temperature:

10 °C - 40 °C (50 °F -104 °F).

The room temperature is not Allow the thermometer to rest

within the range 10 °C - 40 °C in a room at least 30 minutes

(50 °F -104 °F) at room temperature:

10 °C - 40°C (50 °F -104 °F).

Trouble shooting

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eks Microsense Infrared Thermometer 8009 in the language / languages: English, German, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eks Microsense Infrared Thermometer 8009 Manual

Product: