Manual EdgeCraft ScissorPro 500 (page 8 of 8) (English)

663877

Zoom out

Zoom in

1/8

6. With poultry shears, you need to sharpe only the smooth convex blade. The concave (usually

serrated) blade will not need sharpening.

7. Do not attempt to sharpen serrated blades. However, where only one blade is serrated, the

other can be sharpened using the procedure for standard scissors. Look carefully for serra-

tions. They can be very small and difﬁcult to see.

8. Scissors Adjustment: All “professional” scissors and many other scissors have a screw ten-

sioner at the pivot. The performance of your scissors and your scissors life may be improved

by adjusting this pivot to establish and maintain a smooth edge contact when you close the

scissors. Proper adjustment is determined by opening scissors to 50% of blade length, then

tightening until blade looseness is just barely removed. It is important that the pivot not be

overtightened. (If you are uncomfortable with this adjustment—seek assistance.)

NORMAL MAINTENANCE OF THE ScissorPro

No lubrication is required for any moving parts, motor bearing surfaces or sharpening surfaces.

Your sharpener may be cleaned by carefully wiping with a damp cloth. Do not use detergents

or abrasives.

To clean metal dust that may accumulate in the sharpening section, simply remove the circular

plastic plug that is located on the underneath side of the sharpener. Shake out the metal dust and

replace plug. Do this once every eighteen months for normal use or more often with heavy use.

SERVICE

In the event post-warranty service is needed, return your sharpener to the EdgeCraft factory where

the cost of repair can be estimated before the repair is undertaken.

Please include your return address, daytime telephone number and a brief description of the prob-

lem or damage to the sharpener on a separate sheet inside the box. Retain a shipping receipt as

protection against loss in shipment.

Assembled in the U.S.A. www.chefschoice.com

This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on the product.

Chef’sChoice

, EdgeCraft

, Diamond Hone

, ScissorPro

and the overall design of this product are registered

trademarks of EdgeCraft Corporation, Avondale, PA.

Conforms to UL Std. 982 Certiﬁed to CAN/CSA Std. C22.2 No. 1335.1

Certiﬁed to EN 60335-1, EN 60335-2, EN 55014-1+A1, EN 61000-3-2, EN 61000-3-3

A12 2012-01 C158200

EdgeCraft Corporation

825 Southwood Road, Avondale, PA 19311 U.S.A.

Customer Service (800) 342-3255 or 610-268-0500

Send your sharpener (insured and postage prepaid) to:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of EdgeCraft ScissorPro 500 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

EdgeCraft ScissorPro 500 Manual

Product: