663875

EdgeCraft Chef-s Choice - EdgeSelect-Pro 125 Manual

12
Zoom out
Zoom in
Previous page
1/12
Next page
12
normal maintEnancE
No lubrication is required for any moving parts,
motor, bearings or sharpening surfaces. There
is no need for water on abrasives. The exterior
of the sharpener may be cleaned by carefully
wiping with a damp cloth. Do not use detergents
or abrasives.
Once a year or so, as needed, you can remove
metal dust that will accumulate inside the
sharpener from repeated sharpenings. Remove
the small rectangular clean-out cover (Figure
14) that covers an opening on the underside of
the sharpener. You will find metal particles adhered to a magnet attached to the inside of that
cover. Simply rub off or brush off accumulated filings from the magnet with a paper towel or tooth
brush and reinsert the cover in the opening. If larger amounts of metal dust have been created or
if the Stage 3 disk has been cleaned (using the cleaning/dressing means), you can shake out any
remaining dust through the bottom opening when the cover is removed. After cleaning, replace the
cover securely with its magnet in place.
sErVicE
In the event post-warranty service is needed, return your sharpener to EdgeCraft where the cost
of repair can be estimated before the repair is undertaken. Outside the USA, contact your retailer
or national distributor.
Please include your return address, daytime telephone number and a brief description of the
problem or damage on a separate sheet inside the box. Retain a shipping receipt as evidence of
shipment and as your protection against loss in shipment.
Engineered and assembled in the U.S.A. www.chefschoice.com
This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on
the product.
Chef’sChoice
®
, EdgeCraft
®
and Diamond Hone
®
are registered trademarks of EdgeCraft Corporation,
Avondale, PA.
Conforms to UL Std. 982 Certified to CAN/CSA Std. C22.2 No. 64
Certified to EN 60335-1, EN 60335-2, EN 55014-1+A1, EN 61000-3-2, EN 61000-3-3
© EdgeCraft Corporation 2012
E12 C128217
EdgeCraft Corporation
825 Southwood Road, Avondale, PA 19311 U.S.A.
Customer Service (800) 342-3255 or 610-268-0500
Figure 14. Clean-out cover.
… 12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EdgeCraft Chef-s Choice - EdgeSelect-Pro 125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EdgeCraft Chef-s Choice - EdgeSelect-Pro 125 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info