663875
11
Zoom out
Zoom in
Previous page
1/12
Next page
11
suGGEstions
1. Always clean all food, fat and foreign materials from knife before sharpening or resharpening.
If soiled, wash the blade before sharpening.
2. Use only light downward pressure when sharpening - just enough to establish secure
contact with the abrasive disk.
3. Always pull the blade at the recommended speed and at a constant rate over length of blade.
Never interrupt or stop the motion of the blade when in contact with the abrasive disks.
4. Always alternate pulls in right and left slots (of any stage used). Specialized Japanese
blades are an exception and are sharpened primarily on one side of the blade.
5. The edge of the knife blade should be maintained while sharpening at a level position
relative to the top of the counter or table. To sharpen the blade near the tip of a curved blade,
lift the handle up slightly as you approach the tip so that the edge, as it is being sharpened,
is maintained “level” to the table.
6. It is not recommended that you use a conventional “sharpening steel” on knives sharpened
on the Chef’sChoice
®
EdgeSelect-Pro
Diamond Hone
®
Knife Sharpener Model 125.
However, if you prefer a steeled edge, the ChefsChoice
®
precision manual SteelPro
®
Models 470 and 475 are available. Consider resharpening with the professional
Chef’sChoice
®
manual sharpeners if you are using knives at a remote location away from
electrical power. It is recommended that you keep the Model 125 readily accessible and
resharpen often, as described in the Sections above.
7. Used correctly, you will find you can sharpen the entire blade to within
1
/
8
of the bolster or
handle. This is a major advantage of the ChefsChoice
®
EdgeSelect-Pro
Diamond Hone
®
Knife Sharpener Model 125 compared to other sharpening methods - especially important
when sharpening chef’s knives where you need to sharpen the entire blade length in order
to maintain the curvature of the edge line.
If your chef’s knives have a heavy bolster near the handle extending to the edge, a
commercial grinder can modify or remove the lower portion of the bolster so that it will not
interfere with the sharpening action allowing you to sharpen the entire blade length.
8. To increase your proficiency with the Chef’sChoice
®
EdgeSelect-Pro
Diamond Hone
®
Knife Sharpener Model 125, learn how to detect a burr along the edge (as described
above). While you can sharpen well without using this technique, it is the best and fastest
way to determine when you have sharpened sufficiently in Stages 1 and 2. This will help
you avoid over sharpening and ensure incredibly sharp edges every time. Cutting a tomato
or a piece of paper is a convenient method of checking for blade sharpness.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EdgeCraft Chef-s Choice - EdgeSelect-Pro 125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EdgeCraft Chef-s Choice - EdgeSelect-Pro 125 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info