668119
36
Zoom out
Zoom in
Previous page
1/40
Next page
36
4
3
2
1
18.Common Failure
No. Problem Solution
Robot keeps proceeding or moving
backward once power is on.
Turn off the power.
1. Check if there is dust on up-ground height
sensor, which cause robot to make wrong
signal. Use half dry cloth to clean it.
Buffer collision is out of control. Put your
hand at left, middle and right in turn to see
if it can rebound by itself.
2.
Robot may fall in trouble when it is working. In
such case, it will try every possibility to get out
of trouble, but it shall stay at a certain place
when it fails and starts alarm. You should help
it and get rid of the obstacle.
The trouble may be as follows:
1. It is tangled by power cord.
It is tangled by hanging curtain or fringe.2.
Turn off power and take out the dust box., then
follow the steps as below:
1. Check whether there is too much dust on
sponge filter so that it needs to change it.
Make sure there is no dust which blocks the
suction.
3. Take out main brush and clean it. Insure the
both ends of main brush is not tangled by hair
or fiber. Fix it back after it is been cleaned.
4. Examine if there is dust or debris near
driving wheels.
5. Clean dust sensor
If the failure still there after following the steps
above, please contact our after-sales.
2.
Robot is able to detect most of the stairs within
8 centimeters height difference. However, its
performance will weaken when it is smooth
floor with height difference or the floor with
strong reflector. You can put virtual wall under
this situation to prevent it from falling off.
Robot is in trouble.
Robot fails to detect the stairs.
The capacity to clean weakens.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecovacs Deebot D73 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecovacs Deebot D73 in the language / languages: English as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info