701138

Eberspacher Digital Modulator 801 Series Manual

3
Zoom out
Zoom in
Previous page
1/4
Next page
Diagnostic Readout
With the heater switched on, press and hold key until the display shows
‘dA’. The blue LED will briefly illuminate. Release the key. After a short time
the LED flickers momentarily during diagnostic data transfer then goes off. The
display shows FO followed by its fault code then automatically scrolls through
any previously stored fault codes, up to a maximum of 5.
Typical fault codes:
10 = Over voltage - Check battery charging system.
11 = Under voltage - Check battery voltage.
12 = Overheating - Check air ducts for obstruction.
52 = Safety time exceeded - Check fuel supply.
For other fault codes consult your local Eberspächer dealer.
Press and keys together to erase stored fault codes and display shows
‘EE’. To exit diagnostic mode, press and release the key.
If stored fault codes cannot be erased consult your local Eberspächer dealer.
Ventilation
To activate Ventilation Mode, press and hold the key until the blue LED
illuminates and display shows active rotating two digits.
Note: The 801 10 001 version will only run for a maximum period of 1 hour.
To stop ventilation, press key briefly. Blue LED switches off and display
shows ambient temperature.
Technical Specification
Dimensions (mm)
65(w) x 55(h) x 17(d)
Weight
60 grams
Temperature Range
5°C to 32°C
Heater Switched Output
1 amp
Voltage
12 / 24 volt D.C.
Ambient Temperature
Range (Operating)
-30°C to +85°C
Cable Lead
250mm long with pre-crimped Amp Junior Tabs.
Mating terminals / housings supplied loose.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eberspacher Digital Modulator 801 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eberspacher Digital Modulator 801 Series in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info