585220
19
Zoom out
Zoom in
Previous page
1/21
Next page
18
Troubleshooting
Review the following possible solutions if you encounter a problem while using your printer.
If you need further assistance, visit the DYMO Web site at www.dymo.com.
Problem/Error Message Solution
Battery Discharged
Attach the power adapter.
Recharge the battery pack. See Recharging the Battery Pack.
Insert new AA alkaline batteries.
Poor print quality
Clean the print head. See Cleaning Your Printer.
Adjust the print contrast. See Adjusting the Print Contrast.
Check battery level; power may be low.
Label Jam
Motor is stalled due to label jam.
Open the label cartridge compartment and remove the cartridge.
Remove jammed label, clearing the jam.
Clean the cutter blade. See Cleaning Your Printer.
Make sure the label passes smoothly through the label guides on the label
cartridge and that the label and ribbon are taut across the mouth of the
cartridge. See Inserting and Removing the Label Cartridge.
Uneven or slanted printing
The cartridge is not positioned correctly.
Check the label cartridge compartment to make sure the cartridge is
inserted properly. See Inserting and Removing the Label Cartridge.
Make sure the two levers in the label compartment are locked on either side
of the cartridge holding the cartridge in place.
Cannot close the label cartridge lid
The cartridge is not inserted correctly.
Make sure nothing is blocking the cartridge cover and that the label cartridge is
inserted properly. See Inserting and Removing the Label Cartridge.
Unable to return to the previous menu
Press
to return to the previous menu.
Nothing shows in the display
Ensure the printer is turned on.
Insert new batteries, charge battery pack, or plug in power adapter.
Remove power adapter and batteries; reattach power to restart the printer.
No label found
No cartridge is present.
Open the cartridge compartment and insert a label cartridge. See Inserting
and Removing the Label Cartridge.
Display text is too light to read
Turn on backlight. See Using the Backlight.
Adjust the display contrast. See Adjusting the Display Contrast.
Maximum number of lines reached Insert a wider label cartridge.
Too many lines for selected label width
Reduce the number of text lines.
Insert a wider label cartridge.
Maximum number of characters reached Reduce the number of characters for the label.
Printing... No action required. Message disappears when printing is finished.
Barcode not allowed
Barcodes cannot be printed on 6mm (1/4”) labels,
wire/cable labels, or breaker labels.
Insert a wider label cartridge.
Change the label width.
Change the label type.
No response when pressing keys
One of the keys may be jammed.
1 Press each key to determine which key is jammed.
2 Press the jammed key firmly until the key returns to the normal position.
How do I remove the backing from the label? DYMO labels have an easy-to-peel split back.
1 Locate the split on the label backing.
2 Gently pinch the label lengthwise, folding toward the
printed side of the label. The label backing will
separate.
3 Carefully peel away the backing from the label.
Split label
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dymo Rhino 4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dymo Rhino 4200 in the language / languages: English as an attachment in your email.

The manual is 14,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dymo Rhino 4200

Dymo Rhino 4200 User Manual - German - 22 pages

Dymo Rhino 4200 User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info