Manual Drayton Digistat plus 30002 - RF601 (page 1 of 2) (English)

653293

Zoom out

Zoom in

1/2

Room Thermostat

Models:

30002 / RF601

User Guide

What is a room thermostat?

... An explanation for householders

A room thermostat simply switches the heating system on

and off as necessary. It works by sensing the air temperature,

switching on the heating when the air temperature falls below

the thermostat setting, and switching it off once this set

temperature has been reached.

Turning a room thermostat to a higher setting will not make

the room heat up any faster. How quickly the room heats up

depends on the design of the heating system, for example, the

size of boiler and radiators.

Neither does the setting affect how quickly the room cools

down. Turning a room thermostat to a lower setting will result

in the room being controlled at a lower temperature, and saves

energy.

The heating system will not work if a time switch or programmer

has switched it off.

The way to set and use your room thermostat is to ﬁnd the

lowest temperature setting that you are comfortable with,

and then leave it alone to do its job. The best way to do this

is to set the room thermostat to a low temperature – say 18ºC

– and then turn it up by one degree each day until you are

comfortable with the temperature. You won’t have to adjust the

thermostat further. Any adjustment above this setting will waste

energy and cost you more money.

If your heating system is a boiler with radiators, there will

usually be only one room thermostat to control the whole

house. But you can have different temperatures in individual

rooms by installing thermostatic radiator valves (TRVs) on

individual radiators. If you don’t have TRVs, you should choose

a temperature that is reasonable for the whole house. If you do

have TRVs, you can choose a slightly higher setting to make sure

that even the coldest room is comfortable, then prevent any

overheating in other rooms by adjusting the TRVs.

Room thermostats need a free ﬂow of air to sense the

temperature, so they must not be covered by curtains or

blocked by furniture. Nearby electric ﬁres, televisions, wall or

table lamps may prevent the thermostat from working properly.

Your new thermostat with digital display.

LCD Display

Dial

Set button

Battery Compartment

Thermostat Display – Features & Characters

222

SET

A demand for heat is

shown by a ame

symbol on the display,

i.e. the thermostat is

calling for heat to bring

the room up to or

maintain it at the

desired temperature.

During normal

operation the display

shows the actual room

temperature.

When the desired

temperature is being

adjusted the word 'SET'

is shown on the

display.

Low battery warning

is shown by a ashing

battery symbol on the

display.

An RF Model is shown

by an antenna symbol

on the display. (No

symbol denotes a

wired model).

FEATURES

This product has the following user adjustable settings

Simple Setting or Operating

To set the required room temperature

temperature to within 0.5ºC

dial clockwise to increase or anti-clockwise to

the temperature setpoint as it is being adjusted

and ‘SET’ will be displayed. After a few seconds

the display will return

to normal operation and

will display the actual room temperature.

While adjusting the temperature during normal

minimum possible setting the display will ﬂash to

indicate you cannot adjust the product further.

ADVANCED FEATURES

Adjusting the Setpoint using the Preset Temperature Mode

Change the temperature at the press of a button, for example, if

you are going out to the shops for an hour you can reduce the

temperature to save energy and then when you press the button

again on your return the setpoint will return to the previous level.

NB. This feature can be used to quickly adjust the temperature

setpoint to a setback temperature for economy operation if for

ºc

SET

stop ﬂashing on the display as shown,

ºc

SET

When the signal strength has been conﬁrmed remove the batteries to

cancel the test and follow the installation instructions.

Before Installation

If you do not have the knowledge to install the thermostat safely then

you must arrange for a competent electrician to install it for you.

Wiring must conform to the current IEE regulations.

supply is switched off.

top or bottom, is to be used, or extra space for cabling is required, use

WIRING

Off On COM N

FOR FIXED WIRING ONLY

Heating

satisfied

or call for

cooling

Not

required

Call

for

heat'

Common

/switched

live from

Time Control

Room Thermostat

Models:

30002 / RF601

Installation Guide

Technical Data

Power Supply:

Switch Type & Rating:

Radio frequency:

Radio Signal Range: 30m typically. The range may be affected by

the composition / density and number of

Temperature Range: 5 to 30ºC

Mounting:

Pollution Degree:

Software Class:

Rated Impulse Voltage:

Ball Pressure Test:

Industry Standard Wallplate

2.5Kv

75°C

Control Accuracy: + 0.5K @ 20ºC

Ambient Temperature:

Mounting:

mounting

Wiring: Relay:

Pollution Degree:

Software Class:

Designed for ﬁxed wiring only

, to comply

with current IEE regulations.

RF: No wiring required

Power Supply: 230V ac 50Hz

Switch Type & Rating:

23V ac (dc)

Wiring: Designed for ﬁxed wiring only, to comply

with current IEE regulations.

Reception Frequency:

Room Thermostat

Care should be taken to mount the thermostat in a position which

mounted on an inside wall about 1.5m (5ft) above the ﬂoor in a

position where it can respond to room temperature but away from

the direct inﬂuence of radiators or other appliances giving off heat.

Signal Strength

Before ﬁxing the Digistat+RF to the wall it is recommended to ﬁrst

check the signal strength from that location.

1.5m

The following installer options can be adjusted,

1. Application Type

Application Type

then

System Capability

Adjust this setting to suit the heating system capability.

shown

then

than 5 seconds or wait for 1 minute and it will return automatically

ROOM UNIT

unlatch

the clip

Pull back plate

straight off

When changing an existing

product and there is a

neutral wire present, use the

neutral (N) terminal on the

product.

compartment

Digistat+

& Digistat+RF

Digistat+

& Digistat+RF

Technical Helpline: +44 (0) 845 130 7722

www.draytoncontrols.co.uk

Email: customer.care@draytoncontrols.co.uk

06490056001 IssH

Digistat+RF

ﬂashing, this indicates a poor signal and you need to reposition the

Digistat+RF

Voltage Directive

2004/108/EC Electromagnetic Compatibility

Directive

2006/66/EU Battery Directive

Applied Standards:

1999/5/EC R&TTE Directive

2011/65/EU RoHS Directive

low

IV=2% (According to EU: 811/2013,

812/2013, 813/2013 & 814/2014)

Energy Class:

(ErP Rating)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Drayton Digistat plus 30002 - RF601 in the language / languages: English as an attachment in your email.

The manual is 4,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Drayton Digistat plus 30002 - RF601 Manual

Product: