680248
208
Zoom out
Zoom in
Previous page
1/209
Next page
VigorSwitch P2280 User’s Guide
200
Note: RIF is used in Token Ring network to provide source routing and comprises two fields,
Routing Control and Route Descriptor.
When MAC parses the received frame and finds a reserved special value 0x8100 at the location
of the Length/Type field of the normal non-VLAN frame, it will interpret the received frame
as a tagged VLAN frame. If this happens in a switch, the MAC will forward it, according to its
priority and egress rule, to all the ports that is associated with that VID. If it happens in a
network interface card, MAC will deprive of the tag header and process it in the same way as
a basic normal frame. For a VLAN-enabled LAN, all involved devices must be equipped with
VLAN optional function.
At operating speeds above 100 Mbps, the slotTime employed at slower speeds is inadequate
to accommodate network topologies of the desired physical extent. Carrier Extension
provides a means by which the slotTime can be increased to a sufficient value for the desired
topologies, without increasing the minFrameSize parameter, as this would have deleterious
effects. Nondata bits, referred to as extension bits, are appended to frames that are less than
slotTime bits in length so that the resulting transmission is at least one slotTime in duration.
Carrier Extension can be performed only if the underlying physical layer is capable of sending
and receiving symbols that are readily distinguished from data symbols, as is the case in most
physical layers that use a block encoding/decoding scheme.
The maximum length of the extension is equal to the quantity (slotTime - minFrameSize). The
MAC continues to monitor the medium for collisions while it is transmitting extension bits,
and it will treat any collision that occurs after the threshold (slotTime) as a late collision.
208


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek VigorSwitch P2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek VigorSwitch P2280 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info