321257
13
Zoom out
Zoom in
Previous page
1/14
Next page
13
GB
TroubleshootingCentrino cleancontrol
4 Troubleshooting
Before contacting your authorised Royal dealer, Royal service partner or appliance market, first follow the procedure in the following table to check if you
can handle the problem yourself
5 Spare parts
5.1 List of consumable parts
5.2 Sources
See ZPage 66, "International Service".
5.3 Disposal
The filters used are made of environment-
friendly materials and can de disposed of with
your domestic trash.
When the appliance has reached
the end of its usefulness,
especially if dysfunctions recur,
disable the appliance by pulling
the mains plug out of the socket
and cutting off the power cord.
Dispose of the appliance in compliance with the
environmental protection laws of your country.
Electrical waste must not be disposed of together
with domestic waste. Consult your local
authorities or your dealer for advice on recycling.
6 Warranty
6.1 Conditions of warranty
We grant a warranty of 24 months from the
date of purchase for the appliance distributed
by us.
Within this period we will either repair or
replace the appliance or accessory (damages
to accessories do not automatically cause a
replacement of the complete appliance) all
defects due to manufacturing or materials at no
cost. Damages due to inappropriate use
(operation on wrong voltage or type of current,
connecting to unsuitable power supplies,
breakage, etc.) are exempt from warranty, as
are normal wear and minor defects that only
negligibly influence the appliance's
serviceability. Intrusions by unauthorised
parties and the use of spare parts not supplied
by Royal Appliance invalidate the warranty.
Consumable parts are not included in the
warranty and must be paid for! The warranty is
only valid if the date of purchase has been
acknowledged by the dealer's stamp and
signature on the warranty card or if a copy of
the invoice or sales slip is included with the
sent-in appliance. Warranty work does not
extend the warranty period nor does it
constitute a claim for a new warranty!
6.2 In case of a warranty claim
Send us the appliance with its dust container
empty and a short description of the fault in
printed letters. Head your accompanying letter
with the notice "warranty claim". Send it to the
following address, including the warranty card
or a copy of the purchase slip:
ZPage 66, "International Service"
WARNING:
Danger of injury! Never use a defective appliance! Always switch off the appliance and disconnect it from the mains before starting troubleshooting
ZChapter 2.4, "Switching off".
Problem Possible cause Solution
The appliance will not start Plug is not plugged in. Insert the plug into a mains socket and switch on the appliance
ZChapter 2.3, "Vacuum cleaning".
The socket does not carry current. Test the cylinder vacuum cleaner at another socket which you are
sure carries current.
Power cable is damaged. Have the cable replaced by the Royal Appliance Customer Service,
address ZChapter 6, "Warranty".
The vacuum cleaner
suddenly stops.
The overheating protection has tripped, possibly due
to blocked suction channels, dirty filters, or similar.
Switch off the vacuum cleaner and pull the plug from the mains
socket.
Eliminate the cause of overheating (e.g. blocked suction channels,
dirty filters, etc.). Wait for about 45 minutes. After the appliance has
cooled off, you may switch it on again.
Suction power decreases
or when the cleaning
indicator (Fig. 1/8) lights up.
Dust container is full. Empty / clean the dust container.
Nozzle, telescopic tube or suction hose are blocked. Remove the obstacle. If necessary, use a long wooden stick (e.g. a
broomstick) to do this.
The filter is dirty. Change / clean the respective filter or the optional filter sheath,
ZChapter 3.3, "Cleaning / changing the exhaust filter", ZChapter 3.4,
"Cleaning / changing the motor protection filter" or. ZChapter 3.5,
"Cleaning / changing the central laminar filter".
The results are
unsatisfactory in spite of the
appliance working correctly.
The nozzle you are using does not suit the flooring. Change nozzles (Fig. 2 or Fig. 4).
The "carpet/hard floor" switch (Fig. 31) is in the
wrong position for the particular type of floor.
Set the "carpet/hard floor" switch to the correct position for the type
of floor, (Fig. 3).
The appliance makes
unusual noises.
Sucked-in objects are obstructing the air stream. Remove the objects. If necessary, use a long wooden stick (e.g. a
broomstick) to do this.
NOTE:
If you cannot solve the problem following these instructions, contact our service hotline or the Royal customer service.
Item number Description
2881001 Four-piece filter set (1 central
laminar filter, 1 motor protection
filter, 2 filter sheaths)
2881003 Exhaust filter (1 exhaust filter)
2881077 Set of filter sheaths
Centrino_Cleancontrol.book Seite 13 Mittwoch, 16. September 2009 3:03 15
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil m 2881 9 centrino clean control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil m 2881 9 centrino clean control in the language / languages: English, German, Dutch, French, Turkish, Spanish as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info